FORCLAZ
Ref.
8582064
4008373
Trekking Inflatable Mattress MT900 Air Insulator XL - 195 x 63 cm - 1 Person
€140.00
Tax included
Store Availability
Store Availability
This highly insulating inflatable mattress (R-value of 5.4) is the most technical in our range. It was designed to meet the needs of top-level trekkers.
BENEFITS
Easy assembly / dismantling
Inflate with the built-in pump bag.Bi-valve:IN with anti-blowback;OUT to deflate
Easy transport
Total weight 730 g (mattress alone 675g)Folded dimensions diam. 12 cm x 34cm3.9l
Thermal insulation
R-Value 5.4 (ASTM F3340-18 standard). Mattress can be used in all four seasons
Sleeping quality
Dimensions 195 x 63 x 9 cm. Smooth sleeping surface. Adjustable pressure
Traction
Treatment of the mattress to prevent your sleeping bag from slipping on itTECHNICAL INFORMATIONS
How to choose the size of your MT900 Air Insulator mattress
This model is available in L and XL sizes.
The difference between the two sizes is the length (183 cm for the L; 195 cm for the XL) and width (54 cm for size L; 63 cm for the XL).
To choose the mattress that best suits you, you must consider your stature, but not just that.
Your preference and/or your preference for space around your shoulders should also be considered.
So, even if you are 1.75 cm, you will prefer the XL!
The difference between the two sizes is the length (183 cm for the L; 195 cm for the XL) and width (54 cm for size L; 63 cm for the XL).
To choose the mattress that best suits you, you must consider your stature, but not just that.
Your preference and/or your preference for space around your shoulders should also be considered.
So, even if you are 1.75 cm, you will prefer the XL!
How to inflate your MT900 Air insulating mattress
To prevent moisture from being blown into the mattress, we recommend that you use the pump bag in the pouch.
To do this, unroll the entire pump bag/pouch. Connect the valve of the pump bag to the “IN” valve of your mattress. Blow to about 10-20 cm from the inlet of the pump bag to inflate the main volume as much as possible. Roll the bag on itself up to the valve to push the air out of the main bag into your mattress
To do this, unroll the entire pump bag/pouch. Connect the valve of the pump bag to the “IN” valve of your mattress. Blow to about 10-20 cm from the inlet of the pump bag to inflate the main volume as much as possible. Roll the bag on itself up to the valve to push the air out of the main bag into your mattress
How to sleep well on your MT900 Air Insulator mattress
Once you are lying down, remember to adjust the inflation pressure of the mattress by pressing lightly on the IN valve (open cap). A mattress that is too hard is often synonymous with discomfort.
A special coating on both sides of the mattress prevents your sleeping bag from slipping on the mattress and the mattress from slipping on the groundsheet.
A special coating on both sides of the mattress prevents your sleeping bag from slipping on the mattress and the mattress from slipping on the groundsheet.
What material do we use on this mattress?
We use the same fabric on both sides of this mattress: 40 denier polyamide with thicker 45 denier thread to reduce the risk of tearing.
How to repair a leak on your MT900 Air insulating mattress
An inflatable mattress is not puncture-proof, but it can be repaired!
When using it, take every care when installing and handling it.
In the event of a problem, we recommend using self-adhesive repair patches (ref: 8557113).
For more information, copy the following link into your browser:
https://www.forclaz.co.uk
When using it, take every care when installing and handling it.
In the event of a problem, we recommend using self-adhesive repair patches (ref: 8557113).
For more information, copy the following link into your browser:
https://www.forclaz.co.uk
What is the R-Value?
The R-Value is a measure of the thermal insulation. It measures the ability of a mattress to retain or prevent heat from escaping from a warm body (human body) to a cold floor.
The higher the R-Value, the better the insulation of the mattress.
Please note that the R-Values can be added; this means that you can use two mattresses and add their R-Values.
All our mattresses are tested to standard ASTM F3340-18.
The higher the R-Value, the better the insulation of the mattress.
Please note that the R-Values can be added; this means that you can use two mattresses and add their R-Values.
All our mattresses are tested to standard ASTM F3340-18.
What R-Value for what use?
R-value from 0 to 1.9: Hot season (summer) only
R-value from 2 to 3: Use over 3 seasons (spring/summer/autumn)
R-Value from 3 to 6: Use over 4 seasons
R-Value > 6: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)
R-value from 2 to 3: Use over 3 seasons (spring/summer/autumn)
R-Value from 3 to 6: Use over 4 seasons
R-Value > 6: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)
composition
composition
Main fabric: 50.0% Polyamide, 50.0% Polyurethane
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
To ensure that your product lasts for a long time and that it continues to work as it should, store it flat, valve open, in a dry, temperate place.
Restrictions on use
Maximum weight: 150 kgs.<br />
Do not use in the water.
TESTS AND WARRANTY
Warranty
2 Years
Agree by
This MT900 Air Insulating mattress has been validated in the field under real conditions.
It was used for five weeks during the spring of 2023, by two teams of external testers not affiliated with Decathlon, who trekked and bivouacked in the French Alps.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
TextileDope dyed
Product made from 100% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.