AVID
Ref.
8740183
4538870
Hydraulic Brake Kit Avid DB8 4 Piston Front/Rear 200 mm
€105.00
Tax included
Store Availability
Store Availability
Designed for replacing the hydraulic brakes on your Rockrider Feel 900S mountain bike
BENEFITS
Compatibility
Compatible with post mount attachmentCapacity
A full pre-cut brake + adapter and screws disc not includedBraking power
4 pistons mineral oilTECHNICAL INFORMATIONS
Technical features
Brake fluid: Mineral
Lever type: 2 fingers
Lever installation: right or left (flip flap)
Adjustment: brake lever with tool
Caliper mount type: PM
Number of pistons: 4 pistons
Adapter: for 200 mm disc
Colour: Black
Screws supplied
Lever type: 2 fingers
Lever installation: right or left (flip flap)
Adjustment: brake lever with tool
Caliper mount type: PM
Number of pistons: 4 pistons
Adapter: for 200 mm disc
Colour: Black
Screws supplied
Assembly instructions
The brake is provided as a J-kit and the hose needs assembling in the lever. This shape makes it easier to pass through the frame, with internal hose routing.Always tighten to the recommended torque.
After installing the brakes kit, follow the bedding-in procedure.
For the best braking, it's recommended that you use discs made by the same brand as your brake calipers
After installing the brakes kit, follow the bedding-in procedure.
For the best braking, it's recommended that you use discs made by the same brand as your brake calipers
CARE TIPS
Bleed the brakes once per year or each time you change the pad.
When changing the pads, you must bleed the brakes.
When servicing your bike, make sure you don't splash any oily liquids on the disc or brakes as this will reduce their braking power.
When changing the pads, you must bleed the brakes.
When servicing your bike, make sure you don't splash any oily liquids on the disc or brakes as this will reduce their braking power.
NEED HELP?
The technicians at your Decathlon store workshop are available to help you replace the parts of your bike. Feel free to ask them for help!
composition
composition
Main part: 100.0% Aluminium
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Restrictions on use
Get the compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years