WEDZE
Ref.
8756719
4548354
ADULT FREERIDE FREE TOURING SKI BOOTS - FR120
€240.00
Tax included
Store Availability
Store Availability
The ideal alpine ski boots for freeriding thanks to a powerful and efficient flex, whatever the terrain.
BENEFITS
Anatomic design
Very good user comfort. Thermoformable liner for superior comfortCompatibility
Sole with inserts, compatible with bindings for downhill skiing and hikingEasy dressing
Bi-density injected PU clogs for easier dressing and removalFreedom of movement
Skiwalk: 45° range of movement, facilitates ascents. Grip Walk soleRigidity
The progressive flex of 120 is well-distributed to make the most of freeridingCushioning
The PU clogs offers a dynamic flex to better use the terrainWarmth
Insulating liner and sole to retain warmthFit
99 mm: Slim foot. Preformed ankle for optimal supportTECHNICAL INFORMATIONS
GRIPWALK
Greater comfort when walking, INCREASED SAFETY WHEN GLIDING AND EXCELLENT SKI PERFORMANCE. All ski boots carrying the official GripWalk logo are already equipped with pads fixed by screws. The ski boots are compatible with all bindings carrying the GripWalk logo. .
Insulating liner and sole to retain warmth
Polyethylene liner, thermoformable material. By heating your liner, you can compress the foam to make room and increase comfort.
How to thermoform your liners
1- Preheat the oven to 80°C on fan mode.
2- Remove the liners from the shells.
3- Remove the insoles from your liners.
4- Put the liner in the oven for just 5 minutes.
5- Remove the liners from the oven.
6- Put the soles inside the liners.
7- Put the liners back into the boots.
8- Put on your boots and lock each buckle to the mid-way setting.
9- Wait for 15 minutes at room temperature before removing the boot.
There you go, you are ready to ski
2- Remove the liners from the shells.
3- Remove the insoles from your liners.
4- Put the liner in the oven for just 5 minutes.
5- Remove the liners from the oven.
6- Put the soles inside the liners.
7- Put the liners back into the boots.
8- Put on your boots and lock each buckle to the mid-way setting.
9- Wait for 15 minutes at room temperature before removing the boot.
There you go, you are ready to ski
Buckle adjustment
3 micrometric aluminium buckles and one 3-position buckle at the shin to fit every calf size. Wide strap for powerful and easy tightening of the top of the shell. Walk position on the shin hook (Walk in red) to increase the movement of the collar.
SIZING
Fine footwear (last 99 mm), thermoformable polyethylene liner, thermoformable foam around the foot. Lightweight and comfortable liner. Preformed foam at the ankles. Flexible material so that the shape of the liner conforms easily to the climbing and walking phases. In case of discomfort after a few days of use, it’s possible to heat-mould your liners.
WHAT IS THE FLEX?
To provide an indication of rigidity, brands assign a flex rating to every boot. This figure indicates the rigidity of the whole boot: the higher the figure, the stiffer the shell. A flex of 70 is considered best for skiers at intermediate level. A flex from 70 to 100 is for intermediate skiers. Beyond this value, the products are aimed at advanced skiers. Heavy builds can, however, go up a level.
How to try on ski boots?
Once the foot is in the boot, fasten the buckles to the midpoint. Can you go further? This means the volume of the boot isn't right for you. Once the boot is closed, you must flex the boots 3 times by pressing hard on the shins (put your hands on your knees to help) and push your heel backwards inside the boot. Stand upright: your foot should touch the end of the shell. When you flex, your foot should move backwards so you can no longer feel the end.
What should you do if you experience foot pain?
1/ Choose a technical skiing sock, fine to avoid areas of pressure and improve blood circulation in the foot.
2//Choose a sole adapted to the shape of your foot to prevent it from being squashed and pressing against the shell. Ask a salesperson in store for advice.
3/ Thermoform your liner.
2//Choose a sole adapted to the shape of your foot to prevent it from being squashed and pressing against the shell. Ask a salesperson in store for advice.
3/ Thermoform your liner.
HOW TO AVOID HAVING COLD FEET?
Although it is often forgotten, drying the liner is the most effective way to avoid having cold feet. Even at -10°C, the foot sweats and the liner cannot dry by itself in its plastic shell, even over several days. Ideally, it should be removed every day. There is the option to use boot dryers that are more convenient because there is no need to remove the liner, you just plug them in!
Weight
26-26.5, 1914 g
composition
composition
Upper of: 40.0% Polypropylene, 60.0% Thermoplastic Polyurethane; Lining and sock of: 100.0% Polyester; Outer sole of: 100.0% Thermoplastic Polyurethane
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Dry your boots before storing them. Store them with the hooks closed in a ski boot bag in a warm room.
Restrictions on use
Not compatible with Marker Alpinist binding knives
TESTS AND WARRANTY
Warranty
2 Years