DREAMSCAPE
Ref.
8758290
4587104
1 snowboard binding small disc + 4 16 mm screws
€7.00
Tax included
Store Availability
Store Availability
This spare part is designed so that to avoid having to throw away a snowboard binding when one part is broken or lost (see compatibility in the specifications).
BENEFITS
Compatibility
Only with Decathlon bindings. Details in the features.
Easy assembly / dismantling
Phillips screwdriver, ideally PZ3 or PH3.
Corrosion resistance
Stainless steel screws.TECHNICAL INFORMATIONS
Description
_ 1 compatible disc on your board with: 4x4 inserts / 4x2 inserts / Burton systems: channel and 3D,
_4 16 mm screws + 4 washers. WARNING: for the Burton channel system, check the length of the screws = do not let the screws stick out of the Burton insert when they are tightened on the disk + washer. If they do
_ then you could cause irreversible damage to the board base
_ using 2 washers could be a solution. Check each board.
_4 16 mm screws + 4 washers. WARNING: for the Burton channel system, check the length of the screws = do not let the screws stick out of the Burton insert when they are tightened on the disk + washer. If they do
_ then you could cause irreversible damage to the board base
_ using 2 washers could be a solution. Check each board.
Which snowboard bindings are these spare parts compatible with?
Compatible only with the Decathlon/Wedze SNB 500 binding.
WARNING: this small disc is only compatible with Decathlon/Wedze bindings. The diameter of the disc, the sizes or the notch distribution, etc., vary according to the brand.
External diameter of the disc: 85 mm / Internal diameter of the disc: 73 mm / thickness 10 mm.
1 notch = 3° angle.
WARNING: this small disc is only compatible with Decathlon/Wedze bindings. The diameter of the disc, the sizes or the notch distribution, etc., vary according to the brand.
External diameter of the disc: 85 mm / Internal diameter of the disc: 73 mm / thickness 10 mm.
1 notch = 3° angle.
Compatible with the board
This disc lets you mount Decathlon/Wedze bindings on all boards
_ 4x4 inserts
_4x2 inserts
_ Burton Channel
_ Burton 3D
_ 4x4 inserts
_4x2 inserts
_ Burton Channel
_ Burton 3D
Why is there only one disc, not a pair of discs?
This snowboard binding repair kit is provided in case a screw gets lost or the disc gets broken. The likelihood that you will break both discs at the same time or that you lose more than 4 screws is extremely low.
That's why this kit has been kept to a minimum, in order to keep your repair costs low.
That's why this kit has been kept to a minimum, in order to keep your repair costs low.
composition
composition
Base: 100.0% Polyamide; Screws: 100.0% Stainless Steel
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years