QUECHUA
Ref.
8589389
4050396
Women's Long Waterproof Hiking Jacket - Raincut Long
€32.00
Tax included
Store Availability
Store Availability
Our team has designed this long waterproof jacket for your occasional hikes in light rain, on the plains.
BENEFITS
Anatomic design
Belt to tighten the waist | Available from XS to 3XLEasy transport
2 hand pockets|2 hidden sub-pockets (including 1 closing pocket)|1 inside pocketEase of use
Stores into its inside mesh pocket | Loose fit to enable long stridesLightweight
Lightweight and compact jacket | Weight: 420 g in size MWindproof
The fabric of this jacket protects you from winds up to 70 km/hWaterproof
Waterproof coating 5000mm H2O (Schmerbers) | Taped seamsBreathability
Hydrophilic coating RET = 12 | Ventilation area on the upper backTECHNICAL INFORMATIONS
Water repellent without PFC
The fabric of this jacket is water repellent: it lets water slide over its surface without seeping in. In this way, the fabric doesn’t soak up water and stays light and breathable.
The water-repellent property is achieved by treating the fabric's exterior: it doesn’t use fluorinated compounds, which have a harmful impact on fauna and flora.
The water-repellent property is achieved by treating the fabric's exterior: it doesn’t use fluorinated compounds, which have a harmful impact on fauna and flora.
Waterproofing of the component of this jacket
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
Performance of your jacket
To maintain a water-repellent fabric, we recommend reactivating it regularly.
Do this every three washes (it is important to rinse abundantly) or after a dozen uses in the rain.
You can easily reactivate the water repellent property by warming the fabric:
- in a tumble dryer for 15 minutes (synthetic program)
- with a hair dryer at a distance of 20 cm by going back and forth twice
- or two passes with an iron on the delicate setting without the steam function.
Do this every three washes (it is important to rinse abundantly) or after a dozen uses in the rain.
You can easily reactivate the water repellent property by warming the fabric:
- in a tumble dryer for 15 minutes (synthetic program)
- with a hair dryer at a distance of 20 cm by going back and forth twice
- or two passes with an iron on the delicate setting without the steam function.
Fabric breathability
The fabric of this jacket is breathable: RET = 12.
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability
Choose your waterproof jacket according to your sports effort
This jacket is designed for hiking for 2h at a max. pace of 5 km/h, with no elevation gain.
During sports activity, the extent to which we perspire depends on the intensity/duration of the physical effort.If the breathability of the fabric is not adapted to your type of physical activity, the perspiration vapour condenses inside the jacket.You feel damp inside:It is not rain coming through but perspiration vapour condensing.Choose a waterproof jacket according to your level of physical activity.
During sports activity, the extent to which we perspire depends on the intensity/duration of the physical effort.If the breathability of the fabric is not adapted to your type of physical activity, the perspiration vapour condenses inside the jacket.You feel damp inside:It is not rain coming through but perspiration vapour condensing.Choose a waterproof jacket according to your level of physical activity.
Available from XS to 3XL
Our priority? That our hiking clothes fit all body shapes and figures! So that everyone who wants to can enjoy hiking trails in complete comfort. That's why this jacket is available from XS to 3XL.
composition
composition
Main fabric: 100.0% Polyester; Coating: 100.0% Polyurethane; Pocket: 100.0% Polyester; Lining: 100.0% Polyester
Tips for storage and maintenance
ANY TYPE OF IRONING ALLOWED.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
DO NOT TUMBLE DRY.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
We recommend that you always dry this jacket thoroughly before storage.
Restrictions on use
Not recommended for effort
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie.
This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts, to test our products on natural terrain.
Our range of waterproof jackets and over trousers also undergoes a shower test in our climatic chamber at our Decathlon Sportslab laboratory near Lille.
Warranty
2 Years
Agree by
This jacket was tested and approved in June 2020 by a group of testers during a 2-hour hike at the foot of the Arpenaz waterfall in Haute-Savoie.
In order to meet your requirements, Quechua products are tested in the wild in the conditions you encounter during your hikes.
Our teams, as well as a tester panel (made up of partners, ambassadors and customers) test products throughout their development until they go to market.