Filters 0
Filters 0
QUECHUA Ref. 8757257 4547502

Men's Hiking Boots - NH100

€27.00
Tax included
Colour: BLUE / GREEN
  • GREY
  • BLUE / GREEN
Size guide My size is :
Not available

Store Availability

Updated following your comments, our team has designed this NH150 boot for your occasional outings on lowlands, in the forest or on the coast in dry weather.

BENEFITS

Lightweight

Each boot weighs 332 g in size 43 (UK size 9).

Traction

Sole design and 4 mm spike clears mud easily.

Grip

Sole composition & design encourages grip on walking trails.

Cushioning

EVA midsole guarantees comfortable cushioning.

Fitting comfort

5 mm EVA insole | No seams on the heel.

TECHNICAL INFORMATIONS

Strength & durability

Laboratory tests were conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing. These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.

Comfort

Our country walking boots promise one thing and that’s heightened comfort for the wearer; to this end, we have included different ingredients in this boot to take care of your feet such as the EVA foam midsole and insole (ethylene vinyl acetate), or the neck of the boot (top heel section) which includes a synthetic foam for greater comfort when worn.

We have also eliminated the seams in the heel area to avoid any discomfort.

Resistant soles for walking trails

The sole’s design is the result of long research carried out in our labs. It is composed of a specific rubber formula which optimises grip and traction. We are always looking for the best solution to progress on loose or mineral (forest or coastal) walking trails.

When used on roads, this can lead to the premature wear of your boots and cause discomfort. They are not suitable for high mountain walking.

What socks should you wear with the Quechua NH150 boots?

These shoes are slightly breathable but not enough to wick away all humidity created by your perspiration. We advise you to choose Hike 100 Low or Mid socks: they contain moisture-absorbing cotton and have a reverse terry-knit construction under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.

composition

composition

Outer sole of: 50.0% Synthetic Rubber, 50.0% Ethylene Vinyl Acetate; Upper of: 40.0% Polyurethane, 60.0% Polyester; Lining and sock of: 100.0% Polyester

Tips for storage and maintenance

DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C. DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C. IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C. IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.

Storage tips

We recommend you store your boots in a dry, dark and, if possible, ventilated place away from any heat source.

Restrictions on use

Extensive urban use is not recommend (avoid too much tarmac)

TESTS AND WARRANTY

Test product

Our Quechua global design centre is based at the foot of Mont Blanc in Haute-Savoie (FRANCE). This location makes it a real meeting place for our design teams and outdoor sports enthusiasts. Our products are not only tested in our laboratories but also on different terrains, in Haute-Savoie for mountain use, and also on the coast and in forests worldwide.

Warranty

2 Years

Agree by

To meet your requirements, Quechua products are tested out in the heart of nature in the type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.

Videos

Ecodesign approach

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

Ecodesign actions on this product
  • Picture showing Rubber recycled
    Material

    Rubber recycled

    Product made from 11% recycled rubber

    Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 8%.

  • Picture showing Dope dyed
    Process

    Dope dyed

    Product made from 6% dope dyed yarn

    Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.

  • Picture showing Recycled polypropylene
    Material

    Recycled polypropylene

    Product made from 1% recycled polypropylene

    Using recycled polypropylene rather than conventional polypropylene reduces the CO2 emissions linked to the material by at least 51%.

  • Picture showing Water-based polyurethane
    Process

    Water-based polyurethane

    Product made from 2% water-based coated polyurethane

    Using this water-based coating process rather than a conventional process enables us to reduce the CO2 emissions linked to the production of the component by at least 39%.

  • Picture showing Recycled polyester
    Material

    Recycled polyester

    Product made from 13% recycled polyester

    Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.

Learn more about our approach