ROCKRIDER
€0.00
Tax included
replacing the hydraulic brakes on your mountain bike.
BENEFITS
Capacity
Lever_Brake Hose_Caliper+Disc 160mm+6 screws+ IS/PM Adaptor +2 caliper screwsEase of use
Adjust lever reachBraking power
2-piston hydraulic brakingRepair
Repair your bike and give it a new lease of life!TECHNICAL INFORMATIONS
Technical specifications
Oil type: Mineral
Disc rotor size: 160 mm
Disc mount: 6 holes
Adjustment: reach function
Type of caliper mount: PM
IS to PM Adaptor
Number of pistons: 2
Colour: Black
Brake pads: Organic E10.11
Screws supplied
Disc rotor size: 160 mm
Disc mount: 6 holes
Adjustment: reach function
Type of caliper mount: PM
IS to PM Adaptor
Number of pistons: 2
Colour: Black
Brake pads: Organic E10.11
Screws supplied
Assembly tips
Always observe recommended torque tightening.
Follow instructions for bedding in brake pads after mounting brake set.
Follow instructions for bedding in brake pads after mounting brake set.
Maintenance tips:
It is recommended to bleed air from the brakes at least once a year or each time they are serviced.
It is essential to bleed air from brakes when replacing brake pads. When servicing your bike, make sure the disc brake or brake pads don't get spattered with grease otherwise you will suffer from loss of stopping power.
It is essential to bleed air from brakes when replacing brake pads. When servicing your bike, make sure the disc brake or brake pads don't get spattered with grease otherwise you will suffer from loss of stopping power.
Need any help?
The technicians at your Decathlon store are at your service to help you replace your bike parts. Feel free to ask them for help!
Tips for storage and maintenance
Storage tips
Store the brake kit in a dry and temperate place, keeping it away from corrosive products and sea air.
Restrictions on use
Get compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years