Men's Hiking Lightweight Waterproof Jacket MH150
Store Availability
Store Availability
BENEFITS
Anatomic design
Drawcord at jacket hem. Elasticated cuffs. Adjustable hoodLightweight
Only 490 gr in size LWaterproof
Storm protection 2.5 layer membrane, 15,000 mm H²O (Schmerbers)Pockets
2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocketBreathability
Perspiration wicking component (RET=10)TECHNICAL INFORMATIONS
Cut
Hood
Adjustable depth using a Velcro strip positioned at the back of the hood.
Visor at the top of the hood for good face protection.
Main component
MEMBRANE
This product was made with a membrane.
This is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable.
It has the advantage of being flexible, lightweight and breathable.
LAYER DESIGN
COMPONENT WATERPROOFING
This product's component has a 15,000 mm waterproof rating and can withstand the pressure of a 15,000 mm water column.
This is also equivalent to 15000 Schmerbers.
JACKET WATERPROOFING
BREATHABILITY
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: not very breathable fabric
This product was assessed at 10 RET
HOW TO RESTORE THE WATER-REPELLENT PROPERTIES
You can also use the waterproof spray (ref 8554908)
Product design: our expertise
composition
composition
Tips for storage and maintenance
Storage tips
TESTS AND WARRANTY
Test product
Warranty
Agree by
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Process
Dope dyed
Product made from 5% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
Material
Recycled polyester
Product made from 73% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
Process
Biton
Product made from 7% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 60% compared to conventional dyeing.