1 ultra-compact trekking pole-stick - MT900 Ergonomic - black
Store Availability
Store Availability
BENEFITS
Compact design
5 part folding pole. Collapsed length: 38 cm. Collapsed width: ~ 12 x 5 cm
Compatibility
Summer washer and tip provided.Pieces and after-sales parts available separately
Ergonomic grip
From above (walking stick style). Pole aligned with arm, without bending wrist
Adjustable
External lock. Precise & fast adjustment. From 90 cm to 105 cm. Folded: 38 cm
Durability
Aluminium 7075-T6 /6061-T6. Large tube diameter 20/18/16mm. Tungsten tip
Weight
285 g / pole
TECHNICAL INFORMATIONS
How it was designed...
During our treks, we came up with the idea of this model which combines the ultra-compact design of our folding poles with the ergonomic grip of our sticks.
Why? We have noticed that the standard grip does not suit everyone, particularly for long periods. Therefore, we designed this pole slightly differently so that you don't have to bend your wrist and can distribute the force more evenly throughout the arm as it is aligned with the pole axis.
Why have we worked hard on durability?
You trek to enjoy the calm of great expanses which sometimes takes you far from civilisation. You also carry your belongings for several days. Therefore, you need to rely on the resistance of your poles.
We have selected wider tubes in the highest grade aluminium. We have secured the push-pin area with internal reinforcement. Compression tests (pressure on the pole axis) demonstrate that this model can support 790 N (~79 kg) per pole.
Why have we focused on compactness?
You'll probably have to use some form of transport to reach the start of your walk. You will also have to carry a lot of equipment in your bag. It’s therefore much more practical to have compact poles. Once folded, these poles can be stored in the side pocket of your trekking backpack or small hiking bag.
How to adjust your poles to the correct length?
To use the pole: firstly, extend the pole until the “click” of the push-pin. Refer to the instructions attached to the pole.
To adjust the length: the arm along the body must be almost straight or slightly bent. This means that it's much shorter than a traditional pole:
- Open the lever on the external lock;
- Slide the pole to the desired length;
- Close the lever.
Never go over the STOP line to avoid breaking the pole.
Directions for use
This hiking pole is designed to help you balance, propel yourself and distribute effort between arms and legs.
To be on the safe side, check before you set off and at regular intervals that your baton is locked in place by simulating heavy bumps. If you notice that your pole tends to slide down, the lock mechanism needs adjusting. Open the lever and turn the knob a quarter to a half turn.
Do not put on your backpack in case of a storm.
Care tips
Proper maintenance of your baton will ensure that it functions optimally and that it lasts longer.
After use, if water has penetrated the stick, remove the strands and allow to dry. If necessary, clean the dust or mud with water or a dry brush. Once dry, you can reassemble the strands.
We recommend that you do not attempt to oil or grease the mechanisms.
Why is the pole sold individually?
At Decathlon, we have decided to sell our hiking/trekking poles individually. First because of how they are used. Indeed, some people only want to use one pole. Also, if one of your poles breaks, this means you only have to buy one and not a complete pair.
Accessories sold separately and adapted to this model
The advantage of buying Forclaz trekking poles is that you have a wide choice of compatible accessories and spare parts. So you can enjoy it for as long as possible.
- Hiking pole caps: ref. 8580865
- Summer baskets : ref. 8737774
- Winter baskets: ref. 8503857
- Replacement tip: ref. 8755646 or 8755646 (if new screwable version)
composition
composition
Axis: 100.0% Aluminium; Handle: 90.0% Polypropylene, 10.0% Styrene Ethylene Butadiene Styrene
Tips for storage and maintenance
Storage tips
Store the baton in a dry place without tightening the adjusting systems, so that they are not strained and retain their clamping power.
TESTS AND WARRANTY
Test product
To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During the development phase, each model undergoes laboratory stress tests (compression, three-point bending, etc.) until they break. We also test parts separately (tightening power, tearing, etc.). Finally, these tests are regularly repeated in production to ensure a constant level of quality.
Warranty
2 Years