MODULAR INFLATABLE WATER POLO PITCH 20 M x 10 M

Our water polo pitch is also ideal for swimming clubs or groups who are looking to mark out a temporary swimming zone.

Our design offers the option of removing the goalposts, leaving just the outer borders. You can still assemble the various components using the straps and buckles. The inner dimensions will then be reduced to a maximum of 20 metres in length, and 7.5 metres in width.

UNFOLD

Unfold each component of the field on a flat surface.

Inflate each component to a pressure of 7 psi (0.48 bars) using the pump provided and assemble according to the user guide.

The water polo pitch is attached using ropes or an innovative system of weights.

To weigh it down effectively, fill the bags with stones or sand up to the limit to reach a weight of about 15 kg.

Each bag is then inflated in order to swim to the pitch. This makes it easier to position the bags around the pitch. Once the weights are in position, deflate them so that they descend to the bottom.

Separate the weight bags from the field and disassemble the components.



Move each component to a flat surface, fully unscrew the top cap of the valve then partially unscrew the bottom of the valve and allow air to escape for about 1 minute.



PLEASE NOTE: you will hear a very loud noise if you unscrew the bottom of the valve too quickly.

The inflatable parts of our field are made from a TPU bladder surrounded by a Tarpaulin sleeve. (mixture of several layers of PVC and fabric).



This makes the product highly resistant to external factors and ensures the different parts keep their shape.

Our field has been designed so that it can be repaired by the customer. If you notice a puncture on a component, simply open the two zips and remove the bladder to locate the hole.

We supply a repair kit containing self-adhesive patches, several spare valves and a 23 m rope to remove each bladder from its sleeve. We also supply a video that shows how to extract the bladders from their protective sleeves.