QUECHUA
Ref.
8733136
4474078
SELF-INFLATING CAMPING MATTRESS - COMFORT 132 CM - 2 P
€105.00
Tax included
Store Availability
Store Availability
Our camper-designers designed this self-inflating and thick Comfort mattress for two campers seeking a comfortable solution that is easy to install.
BENEFITS
Compatibility
Use the zips to twin it with the same Single or Double Comfort mattress
Noise level
Less creaking noises when you move around during the night
Easy assembly / dismantling
Inflation without a pump | Double valve: precise inflation and quick deflation
Easy transport
Weight: 3.2 kg | Bag dimensions 72 x 50 x 11 cm | Carrying case
Thermal insulation
4 seasons of use. R-Value standard ASTM F3340-18: 5,2
Durability
Mattress approved to withstand at least 200 inflation/deflation cycles
Sleeping quality
Sizes: 200 x 132 x 4.5 cm | Flat non-slip sleeping surfaceTECHNICAL INFORMATIONS
The principle of a self-inflating mattress
A self-inflating mattress consists of an airtight envelope glued to an open cell foam in which the air circulates. When you unfold the mattress, it will return to its original shape and thickness (4.5 cm for the AG Comfort) and fill with air accordingly. However, it requires some mouth inflation so you can adjust it to the pressure level suitable for you.
Self-inflation is more or less noticeable depending on the thickness of the mattress.
Self-inflation is more or less noticeable depending on the thickness of the mattress.
Directions for use
We advise you to get out and unroll your mattress as soon as you set up camp. Leave the valve open to make pre-inflation easier. A self-inflating mattress inflates itself to about 80%. You will need to blow up the rest yourself, so you can adjust the pressure to your desired comfort level.
Caution: choose your mattress width according to your tent's interior measurements.
Caution: choose your mattress width according to your tent's interior measurements.
Cover weight and dimensions
Weight: 3.2 kg | Bag dimensions 72 x 50 x 11 cm.
Thermal properties and warmth: 4 seasons use, winter use and in extreme conditions
Since the beginning of 2020, a new standard has been validated to assess the level of insulation of your mattress: standard ASTM F3340-18.
This standard measures the capacity of the mattress to retain or return body heat in order to avoid its loss and therefore provide you with thermal comfort.
Thermal insulation thanks to the foam.
R-Value standard ASTM F3340-18 self-inflating mattress GA COMFORT: 5.2 (measured by an independent laboratory)
This standard measures the capacity of the mattress to retain or return body heat in order to avoid its loss and therefore provide you with thermal comfort.
Thermal insulation thanks to the foam.
R-Value standard ASTM F3340-18 self-inflating mattress GA COMFORT: 5.2 (measured by an independent laboratory)
Thermal properties and warmth (continued)
The R-value expresses the thermal performance and resistance of the mattress. The higher the R-Value, the more the mattress insulates you from the cold ground.
- R-value from 0 to 1.9: mattress designed for use in warm season (summer) only
- from 2 to 3: mattress design for use in 2 or 3 seasons (spring/summer/autumn)
- from 3 to 4: 4 season mattress, winter use possible
- higher than 4.5: winter use and extreme conditions
- R-value from 0 to 1.9: mattress designed for use in warm season (summer) only
- from 2 to 3: mattress design for use in 2 or 3 seasons (spring/summer/autumn)
- from 3 to 4: 4 season mattress, winter use possible
- higher than 4.5: winter use and extreme conditions
composition
composition
Foam: 100.0% Polyurethane; Floor mat: 50.0% Thermoplastic Polyurethane, 50.0% Polyester; Main fabric: 50.0% Thermoplastic Polyurethane, 50.0% Polyester; Carry bag: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
We recommend you store your mattress away from moisture and extreme temperatures.
Restrictions on use
Maximum recommended weight: 220 kg. <br />
Do not use in the water.
TESTS AND WARRANTY
Test product
Sleep comfort of mattresses is measured by our Research and Development centre. All our mattresses undergo mechanical tests that assess their performance and durability to guarantee good sleep and good recovery when camping.
Caution: choose your mattress width according to your tent's interior measurements.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart of nature in the type of conditions you may encounter during your hikes.
Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.