DREAMSCAPE
Ref.
8751399
4584639
pair of front strap fittings for Wedze snowboard bindings
€7.00
Tax included
Store Availability
Store Availability
This spare part is designed so that to avoid having to throw away a snowboard binding when one part is broken or lost (see compatibility in the specifications).
BENEFITS
Compact design
outer side: W = 1.85 cm / L = 16 cm on the inside: W = 1.85 cm / L = 12.5 cm
Capacity
4 front (toe) strap fittings for 1 pair of bindingsTECHNICAL INFORMATIONS
Description
2 parts that are non-symmetrical between the right and left foot: _ 1 strap fitting with pre-drilled positions / right foot
_ 1 strap fitting with pre-drilled positions / left foot
2 parts that are symmetrical between the right and left foot
_ 2 ratcheted strap fittings.
_ 1 strap fitting with pre-drilled positions / left foot
2 parts that are symmetrical between the right and left foot
_ 2 ratcheted strap fittings.
Compatibility with bindings
_SNB 500/8668654 (1° winter - September 2022)
How to change the strap attachment
_ remove the binding from the board,
_ turn the binding to remove the old strap fitting from underneath,
_ put the new strap in place, by pushing it in from below and pulling the top,
_ there are 2 possible positions, one further forward for large feet and the other further back for smaller feet
If you have several strap fittings to replace then do one at a time so you always have a one to follow and know where each strap goes.
_ turn the binding to remove the old strap fitting from underneath,
_ put the new strap in place, by pushing it in from below and pulling the top,
_ there are 2 possible positions, one further forward for large feet and the other further back for smaller feet
If you have several strap fittings to replace then do one at a time so you always have a one to follow and know where each strap goes.
Dimensions
outer side: width 1.85 cm / length 16 cm
on the inside: width 1.85 cm / length 12.5 cm
on the inside: width 1.85 cm / length 12.5 cm
composition
composition
Elastic band: 100.0% Thermoplastic Polyurethane; Buckles: 100.0% Aluminium
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years