Scuba Diving Octopus HELIX PRO

Pneumatic balancing mechanism for smooth and easy breathing.

Venturi effect adjustment mechanism (ergonomic design for easy use, even with gloves).

Heat exchanger to prevent freezing

Weight: 186 g

Hose length (yellow): 1000 mm

Average breathing rate: 0.85 joules/litre

Flexible and robust Comfo-Bite mouthpiece that helps reduce jaw fatigue thanks to its unique mouth bridge.

Luminescent yellow protective cover for better visibility.

Make sure you put the dust cap on properly.

Soak the regulator in a tray of fresh water.

DANGER: If you use a hosepipe, do not use a pressure jet to clean the 2nd stage. The pressure of the jet could damage the membrane and/or the internal valve.

Wipe the regulator dry.

Do not expose your regulator to full sunlight for a lengthy period.

Store your regulator in a clean environment away from light and at a moderate temperature.

Do not store it near a source of heat or in a room that may contain chemical vapours like chlorine, ozone, etc. (e.g. a swimming pool machine room).

Never store the regulator on top of a cylinder/tank

DANGER: Never use solvents or hydrocarbon-based products to clean or lubricate your regulator. Never use spray cans.

Aqualung advises you to service your regulator every two years and to make a visual inspection at least once a year.

These two inspections should be carried out by a Aqualung approved workshop

Your regulator should be services more frequently depending on the number of dives and conditions of use.