BTWIN
Ref.
8750333
4664205
Folding Bike Front Bag Mount
€9.00
Tax included
Store Availability
Store Availability
Replacing the front mount on your folding bike or improving your folding bike.
BENEFITS
Compatibility
Compatible with Decathlon folding bikes.
Capacity
Single front mount Without screws Without reflector (8757202)
Easy assembly / dismantling
Torque: 5 Nm (± 1 Nm) Special screws required.
Repair
Repair your product and give your equipment a second life!TECHNICAL INFORMATIONS
Assembly
Torque: 5 NM (± 1 Nm)
2 M5 x 8 A4 convex socket head cap screws with thread-locking fluid
2 M5 A4 Schnorr washers
Green thread-locking fluid to be added on the screw thread and in the threaded hole
2 M5 x 8 A4 convex socket head cap screws with thread-locking fluid
2 M5 A4 Schnorr washers
Green thread-locking fluid to be added on the screw thread and in the threaded hole
Need help?
The technicians at your Decathlon store workshop are available to help you replace the parts of your bike. Feel free to ask them for help!
To install the new front mount, you'll need:
Front mount: 8750333
Compatible reflector: 8757202
Two iso 7380 Torx M5X10 screws with thread-locking fluid and two DIN25201 stainless steel A2 lock washers (sold separately)
Compatible reflector: 8757202
Two iso 7380 Torx M5X10 screws with thread-locking fluid and two DIN25201 stainless steel A2 lock washers (sold separately)
How to replace your Tilt folding bike's lights (8524992) with the version used on our current folding bikes (1/4)
The original set of lights on our older folding bikes is being replaced by a front light and mount, a rear light, and a front mount for your bags.
How to replace your Tilt folding bike's lights (8524992) with the version used on our current folding bikes (2/4)
If you want to install the new USB rechargeable front light, you'll need:
The stem top cap: 8819793
The front light + mount: 8757414
The V2 computer stem + cover: 8757187
One CHC M6 x 16 mm class 8.8 A4 screw with thread-locking fluid and one DIN 912 M6 A4 washer (sold separately).
The stem top cap: 8819793
The front light + mount: 8757414
The V2 computer stem + cover: 8757187
One CHC M6 x 16 mm class 8.8 A4 screw with thread-locking fluid and one DIN 912 M6 A4 washer (sold separately).
How to replace your Tilt folding bike's lights (8524992) with the version used on our current folding bikes (3/4)
In addition, you can replace the original front mount with a new one that can take a bike bag. To do this, you'll need:
Front mount: 8750333
Compatible reflector: 8757202
Two iso 7380 torx M5X10 screws with thread-locking fluid and two DIN25201 stainless steel A2 lock washers (sold separately)
Front mount: 8750333
Compatible reflector: 8757202
Two iso 7380 torx M5X10 screws with thread-locking fluid and two DIN25201 stainless steel A2 lock washers (sold separately)
How to replace your Tilt folding bike's lights (8524992) with the version used on our current folding bikes (4/4)
If you want to replace the rear light with the new USB rechargeable one, you'll need the following product references:
Rear light: 8757417
Frame plug: 8819778
Rear light: 8757417
Frame plug: 8819778
composition
composition
Main part: 100.0% Polypropylene
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Restrictions on use
Get the compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years