ROCKRIDER
Ref.
8787139
4748606
Carbon Rear Triangle EXPSCC20 - Compatible to Upgrade the EXPSC19
€460.00
Tax included
Store Availability
Store Availability
Replacing the rear triangle of your ROCKRIDER XC mountain bike, generation EXPSC19 or EXPSCC20
BENEFITS
Compatibility
compatible with EXPSC19 and EXPSCC20 framesLightweight
lighter weight... 600 g less, compared to your aluminium triangleRepair
Repair your product and give your equipment a second life!TECHNICAL INFORMATIONS
ALUMINIUM TRIANGLE UPGRADE
If you have an XC 900S or XC 500S, you can use this to upgrade your bike.
Save weight and enjoy all the benefits of carbon.
To be able to upgrade your XC 900S or 500S bike, you'll also need to order and replace the carbon steering rod (8785160) as well as the axle between the steering rod and the triangle, which you'll find in the kit (8787138).
Save weight and enjoy all the benefits of carbon.
To be able to upgrade your XC 900S or 500S bike, you'll also need to order and replace the carbon steering rod (8785160) as well as the axle between the steering rod and the triangle, which you'll find in the kit (8787138).
COMPATIBILITY
If you have an XC 900S with an old generation of frame, you'll also need to replace the rear wheel axle and derailleur dropout (ref. 8734640 + 8734724)
Mounting
We recommend having this assembled in our network of workshops in order to benefit from the skill and expertise of our technicians.
With them, you'll be sure that the bearings are correctly placed (with bearing press) and that everything is tightened to the recommended torque... a service that gets everything right.
REAR TRIANGLE REPLACEMENT: 8187198
With them, you'll be sure that the bearings are correctly placed (with bearing press) and that everything is tightened to the recommended torque... a service that gets everything right.
REAR TRIANGLE REPLACEMENT: 8187198
SPECIFICATIONS
Materials: 70% Carbon / 30% Epoxy
composition
composition
Main part: 70.0% Carbon Fiber, 30.0% Epoxy Resin
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Restrictions on use
Get the compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years