SIMOND
Ref.
8796712
4834916
CLIMBING AND MOUNTAINEERING HALF ROPE - ABSEIL ALPINISM 8.1 MM X 50M BLUE
€110.00
Tax included
Store Availability
Store Availability
Simond is now offering you a new abseil rope with a diameter of 8.1 mm for versatile use in mountaineering and on big, rocky trails.
BENEFITS
Stretch
Good fall absorption thanks to a low-impact force of 5.5 kN.Lightweight
Its weight of 41 g/m guarantees you a genuine comfort of use.Versatility
Meets with 2 standards: Double and twin rope.Ergonomic grip
8.1 mm diameter for the best weight balanceWater resistance
The rope was treated with a water-repellent DRY core and sheath (UIAA DRY label)TECHNICAL INFORMATIONS
Made in France
All of our ropes are designed and tested in Chamonix, in the Mont Blanc valley.
They are made in northern France by our manufacturing partner, Cousin, expert rope makers with 170 years of experience.
They are made in northern France by our manufacturing partner, Cousin, expert rope makers with 170 years of experience.
UIAA Dry treatment
This rope has the UIAA Water Repellent label
A brief summary of test:
- A rope sample is subjected to light abrasion over its entire surface, the equivalent to a few days’ use.
- It is soaked for 15 minutes.
- the amount of absorbed water must not be greater than 5% of the sample’s weight.
The SIMOND DRY ropes easily meet UIAA requirements
The rope's mechanical features are last longer in cold and wet conditions.
A brief summary of test:
- A rope sample is subjected to light abrasion over its entire surface, the equivalent to a few days’ use.
- It is soaked for 15 minutes.
- the amount of absorbed water must not be greater than 5% of the sample’s weight.
The SIMOND DRY ropes easily meet UIAA requirements
The rope's mechanical features are last longer in cold and wet conditions.
Ultrasound seal
Deterioration of rope ends is no longer an issue thanks to this new ultrasound fusion process.
Middle marking
To improve your safety, this rope features a black mark which indicates the middle of the rope.
Weight
41 g/m
PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.
PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.
Technical features
NUMBER OF FALLS: 5 / 13
IMPACT FORCE: 5.5 / 8.7 KN
DYNAMIC ELONGATION: 32.4% / 27.9%
STATIC ELONGATION: 11.6% / 7.6%
SHEATH SLIPPAGE: 0
IMPACT FORCE: 5.5 / 8.7 KN
DYNAMIC ELONGATION: 32.4% / 27.9%
STATIC ELONGATION: 11.6% / 7.6%
SHEATH SLIPPAGE: 0
Stds/Certif.
EN 892:+A2: 2021.
Checking your rope
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
Warranty
2 years
composition
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car in the height of summer.
TESTS AND WARRANTY
Test product
Designed by our teams in the Chamonix valley, at the foot of the Mont Blanc, all our ropes are lab tested, certified to guarantee their mechanical features.
Our technical partners test them in the field to validate product claims.
Warranty
2 Years
Agree by
Team SIMOND mountaineers, climbers and mountain guides