TRIBORD
Ref.
8800032
4845474
Foil Stabiliser - WNG500 300 cm²
€135.00
Tax included
Store Availability
Store Availability
Riders looking to replace their Tribord WNG500 foil stabiliser in the event of theirs being lost or damaged.
BENEFITS
Glide performance
Foil minimises drag, so you'll have as much time as possible for your jibesTECHNICAL INFORMATIONS
Characteristics
- Stabiliser with high ratio (very extended out) but with a low delta and a homogeneous dihedral (single curve) in order to opt for gliding without compromising on manoeuvrability.
- Finish with rounded tips here, as well.
DIMENSIONS
300 cm²
Span: 468 mm
Cord: 77 mm
Weight: 290 g (+/- 10%)
- Attachment based on a concave part of the airframe: If you want, you can adjust the incline to adjust the foil's power.
- Finish with rounded tips here, as well.
DIMENSIONS
300 cm²
Span: 468 mm
Cord: 77 mm
Weight: 290 g (+/- 10%)
- Attachment based on a concave part of the airframe: If you want, you can adjust the incline to adjust the foil's power.
Stabiliser adjustment
- In a central position, the foil is balanced for 50/50 pressure under both feet.
- If you move the stabiliser forward, the pressure under the front foot is reduced and the foil will be less powerful: This is great when there's a lot of wind or for beginners - it allows for a gentler take-off.
- If you pull the stabiliser back, the power of the foil and the pressure under the front foot is increased, which is interested for advanced riders wanting a good rotation effect for light winds or jumps.
- If you move the stabiliser forward, the pressure under the front foot is reduced and the foil will be less powerful: This is great when there's a lot of wind or for beginners - it allows for a gentler take-off.
- If you pull the stabiliser back, the power of the foil and the pressure under the front foot is increased, which is interested for advanced riders wanting a good rotation effect for light winds or jumps.
composition
composition
Fin: 34.0% Glass Fiber, 33.0% Resin, 33.0% Foamed PVC
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years