OLAIAN
Ref.
8807208
4881066
Surfboard Wall Mount - Wood
€32.00
Tax included
Store Availability
Store Availability
Easy to mount wooden rack. It can be set up horizontally via two holes in the wall. It can store three boards vertically.
BENEFITS
Capacity
Up to 3 boards, from shortboard to longboard. 12 cm spacing between each arm
Easy assembly / dismantling
Very simple assembly. Wall attachment. 2 holes to drill. Screws not supplied
Versatility
If you buy a 2nd rack, you can store 3 boards horizontally.
Robustness
Product weight 900 g. Supports up to 12 kg per tier when stored horizontally.TECHNICAL INFORMATIONS
ASSEMBLY
Assembly instructions and drilling template supplied with product packaging.
Tools required: a hammer to drive in the fixing wedges, and a drill.
Screws and bolts not supplied. You need to buy the screws and anchors you need for installation directly from a DIY shop to make sure you get the right ones for your wall.
The product has 3.5 mm diameter holes to accommodate screws.
Safety straps to support the boards.
Tools required: a hammer to drive in the fixing wedges, and a drill.
Screws and bolts not supplied. You need to buy the screws and anchors you need for installation directly from a DIY shop to make sure you get the right ones for your wall.
The product has 3.5 mm diameter holes to accommodate screws.
Safety straps to support the boards.
RESTRICTIONS OF USE
Use indoors (home or garage).
Make sure that the total load on each arm does not exceed 6 kgs (Do not hang from a hook).
For horizontal storage of boards (if 2 racks are purchased), maximum weight supported per tier = 12 kg.
When stored vertically, do not hang other objects from the different arms (overalls, etc.).
Make sure that the total load on each arm does not exceed 6 kgs (Do not hang from a hook).
For horizontal storage of boards (if 2 racks are purchased), maximum weight supported per tier = 12 kg.
When stored vertically, do not hang other objects from the different arms (overalls, etc.).
MANUFACTURE
This rack is made in Poland from 100% raw Beech wood, harvested locally from FSC-certified forests.
CARE
As this wood is untreated, if you want to increase its resistance to humidity, you can use a natural oil treatment (linseed oil, for example).
DESIGN and TEST IN USE
Product designed and tested by our surfer teams in Hendaye (France). The Olaian global design centre is located on the banks of the River Bidassoa in Hendaye. This allows us to design products in contact with users and in the marine.
composition
composition
Main part: 100.0% Wood
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years