ITIWIT
Ref.
8809125
4894855
Adjuster ring for Itiwit kayak/canoe aluminium paddles
€8.00
Tax included
Store Availability
Store Availability
Adjustment system for Itiwit aluminium canoe/kayak paddles in the event of loss or breakage. The adjuster valve is sold separately.
BENEFITS
Ease of use
This ring makes it easier to adjust the size of your paddleTECHNICAL INFORMATIONS
How to change your paddle ring
1- unscrew the damaged ring
2- remove it from the tube
3- clean the zone of the tube
4- apply epoxy glue on the tube
5 - unscrew the new ring
6- slide the ring over the tube
7- retrieve the adjuster ring and screw from the old ring
8 - re-tighten the screw so that you can close the clip without excessively forcing it
2- remove it from the tube
3- clean the zone of the tube
4- apply epoxy glue on the tube
5 - unscrew the new ring
6- slide the ring over the tube
7- retrieve the adjuster ring and screw from the old ring
8 - re-tighten the screw so that you can close the clip without excessively forcing it
Which kayak paddles is this ring compatible with?
This adjuster ring is compatible with the Itiwit orange aluminium 2-section adjustable kayak paddle, and with the Itiwit 4-section adjustable kayak paddle.
Please note, the adjuster clip does not come with the ring. You should use the adjuster clip from the defective ring or order one (Locking system ref 8561138)
Please note, the adjuster clip does not come with the ring. You should use the adjuster clip from the defective ring or order one (Locking system ref 8561138)
composition
composition
Main part: 100.0% Polyoxymethylene
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years