ROCKRIDER
Ref.
8826169
4976500
Rear Frame Steerer Tube Kit for Rockrider E-Explore 500S/520S/700S
€21.00
Tax included
Store Availability
Store Availability
Designed for replacing the steerer tube on your Rockrider E-Explore 500S/520S/700S mountain bike
BENEFITS
Compatibility
E-Explore 500S/520S/700SCapacity
2 screws 4 washers 2 bearingsRepair
Repair your product and give your equipment a second life!TECHNICAL INFORMATIONS
Care tips
Regularly check that the bolts are tightened to the correct torque.
If you tighten them, you will need to reapply thread-locking fluid.
If you tighten them, you will need to reapply thread-locking fluid.
Assembly instructions
Recommended tightening torque: 14/16Nm
We recommend applying a little grease to the bolts and some thread-locking fluid to the thread.
We recommend applying a little grease to the bolts and some thread-locking fluid to the thread.
Need Help?
The technicians at your Decathlon store workshop are available to help you replace your bike's parts. Feel free to ask them for help!
composition
composition
Main part: 100.0% Steel
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Restrictions on use
Get the compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years