Filters 0
Filters 0
QUECHUA Ref. 8676217 4451121

FLEXIBLE CAMPING COOL BOX - 20L - 9 HOURS OF COOL STORAGE

€24.00
Tax included
Colour: BLUE
  • BLUE
Not available

Store Availability

Our camper designers have designed this Compact 20 L cooler that's flexible and robust, to keep your drinks and food cool for half a day.

BENEFITS

Compact design

Folds and stores easily to take up less space in your car

Ease of use

Wide zipped opening | One storage pocket on the outside

Isothermal

Keeps food fresh for 9 hours without ice packs | Standard: EN 12546-2

Weight

Lightweight: 782g

Carrying comfort

Adjustable shoulder strap and foam patch for shoulder relief

TECHNICAL INFORMATIONS

Capacity

20 litres. Recommended for 2-4 people.

There is a stretchy mesh storage pocket on the outside.

Dimensions

When unfolded, the cooler's dimensions are:

Height: 38 cm | Length: 34 cm | Width: 31 cm



Internal dimensions:

Height : 34 cm | Length: 30 cm | Width: 28 cm



When folded, the cooler becomes more compact and has the following dimensions:

Height : 18 cm | Length: 32 cm | Width: 30 cm

WATERPROOFING

This ice box is not waterproof.

It’s normal for moisture or water inside the cooler (through condensation, for example) to seep through seams. This prevents humidity or unwanted water from being stored inside the cooler.

Directions for use

Using tests, conducted according to the EN 12546-2 standard, we measured the cooler's capacity to keep food cool for 13 hours with ice packs (1.2 kg).

To improve the thermal properties of your cooler, we recommend:

- using cold packs,

- leaving your cooler in the shade,

- only opening it when necessary and quickly closing it.

Robustness

We have used reinforced 600 denier* polyester fabric (PES) for the bottom of the cooler to increase the product's robustness outdoors and in the mountains.



*Denier tells you the weight of a yarn in grams per unit length of 9 metres; so, for a 600-denier fabric, this means it weighs 600 grams for 9 metres.

FOLDING

By folding, you can reduce the volume of the cooler to save space when storing it. Here are our tips for correct folding:

- close the zip of your cooler,

- press the top down to compress it as much as possible,

- secure by putting the elastic, located on the side, around the cooler to keep it as flat as possible.

composition

composition

Foam: 100.0% Polyurethane; Back fabric: 15.0% Polyurethane, 85.0% Polyester; Lining: 15.0% Polyurethane, 85.0% Polyester; Pad: 100.0% Polyethylene

Tips for storage and maintenance

MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C. IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT. MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C. IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.

Storage tips

We recommend you choose a clean, dry area. It’s best to wash and dry your cooler before storing it away.

Restrictions on use

Not waterproof. <br /> Do not load your cooler above 8 kg.

TESTS AND WARRANTY

Test product

The European standard EN 12546-2 certifies the performance of the cool bag without ice packs. To obtain this standard, tests are carried out by an external laboratory. These tests consist of placing water at a temperature of 5°C into the cooler, which itself is placed in an world of 32°C. The point is to then measure the time the water takes to reach a temperature of 15°C. The measured time for this cooler was 9 hours.

Warranty

2 Years

Agree by

To fulfil your needs, the Quechua products are tested in the countryside under the conditions that you will come across when camping. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.

Ecodesign approach

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

Ecodesign actions on this product
  • Picture showing Greige
    Process

    Greige

    Product made from 26% undyed yarn

    Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 58% compared to conventional dyeing.

  • Picture showing Dope dyed
    Process

    Dope dyed

    Product made from 74% dope dyed yarn

    Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.

Learn more about our approach