VOLA ADVANCED PREPARATION KIT, sharpening and waxing for skis or snowboards

Kit containing:

- 1 waxing iron with thermostat

- 1 wax remover bar R 201 80 g

-1 wax base bar MX201 80g

-1 plastic scraper 3 mm

-1 nylon brush

-1 bronze brush

- 1 Ergo 85/90 sharpener

- 2 elastic straps for ski brakes

1 400 diamond file

- Place the elastic straps on the brakes to work on the base without discomfort

- Clean your base to remove dust and dirt (with R 201 wax remover applied hot and scraped before cooling).

- Sharpen your edges starting with the side walls

- use the diamond file to finish and remove the thread

- Wax depending on the selected chosen temperature (Yellow/Red or blue)

- Scrape the base after 2 hours and polish it with a soft cloth

Equip yourself with a waxing iron and a bar of wax. Melt a few drops of wax by placing the bar against the iron's plate. Using the iron, spread the wax over the entire surface of the base. Then comes the tricky bit: pass the iron slowly over your skis (from tip to heel), without ever leaving the iron too long in the same place, or worse still completely motionless on your skis, as this will damage your base.