ITIWIT
Ref.
8486041
2546374
Inflatable 2/3 person touring Kayak High-pressure Bottom - X100+
€470.00
Tax included
Store Availability
Store Availability
Sail on calm waters as a duo or trio with this inflatable kayak. Ideal for a half-day outing, you'll enjoy superb glide performance.
BENEFITS
Easy assembly / dismantling
Inflates in 10 minutes with a dual action hand pump.
Glide performance
The bow shape gives the kayak good glide performance. 3 keels.
Robustness
Dropstitch bottom. Tarpaulin side tubes with pressure relief valves.
Volume
For 2 to 3 people, up to a maximum of 245 kg (540 lbs).
Sitting comfort
Raised seat for comfort when at rest and when paddling.
Stability
Side tubes and a wide, inflatable floor for good stability.
Repair
Spare parts available online or at you nearest Decathlon workshop.TECHNICAL INFORMATIONS
Technical data and weight.
INFLATED SIZE
Length: 410 cm
Width: 102 cm
FOLDED & BAGGED SIZE
Height: 72 cm
Width: 45 cm
Thickness: 37 cm
Weight: 18 kg
Maximum floor pressure: 0.34 bar (5 psi)
Side tube and seat pressure: 0.2 bar (3 psi)
Number of seats: 2 or 3 seats
Content: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.
PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
Length: 410 cm
Width: 102 cm
FOLDED & BAGGED SIZE
Height: 72 cm
Width: 45 cm
Thickness: 37 cm
Weight: 18 kg
Maximum floor pressure: 0.34 bar (5 psi)
Side tube and seat pressure: 0.2 bar (3 psi)
Number of seats: 2 or 3 seats
Content: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.
PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on.
Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on.
Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from overinflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the kayak reaches
the correct internal pressure
Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from overinflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the kayak reaches
the correct internal pressure
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position.
Position the seats on the floor using the rip-tab areas located under the seat and on the floor.
Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.
The boat is ready to be launched.
Position the seats on the floor using the rip-tab areas located under the seat and on the floor.
Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.
The boat is ready to be launched.
Glide performance
The deck of the Itiwit 100+ is based on the same dropstitch construction as the inflatable stand-up paddle boards. Dropstitch is a mesh made of polyester yarns between two layers of PVC. When the deck is inflated to a high pressure, the threads are stretched and the construction becomes very strong, thus avoiding any deformation.
Care instructions
Remove the seats and slightly deflate the floor to make it easier to rinse out.
Rinse the kayak, floor and seats with clean water after each use to avoid damage from sand, salt water and sun.
Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.
Rinse the kayak, floor and seats with clean water after each use to avoid damage from sand, salt water and sun.
Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.
Disassembly & folding
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins.
Deflate the side bladders. The valves are located at the back of the kayak. PLEASE NOTE: Do not unscrew the pressure relief valves at the front.
Fold the floor.
Fold the rest of the kayak in half lengthwise. Flatten the front fin base.
Lay the rolled floor on the front end. Roll the kayak to the rear end.
Strap the kayak.
Deflate the side bladders. The valves are located at the back of the kayak. PLEASE NOTE: Do not unscrew the pressure relief valves at the front.
Fold the floor.
Fold the rest of the kayak in half lengthwise. Flatten the front fin base.
Lay the rolled floor on the front end. Roll the kayak to the rear end.
Strap the kayak.
Storage
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
After-sales service
Spare parts are available for Itiwit X100+ kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.
Drop Stitch floor: 8561072
Pressure relief valve: 8561069
Carry bag: 8605095
Paddle rip-tab: 8561070
Drop Stitch floor: 8561072
Pressure relief valve: 8561069
Carry bag: 8605095
Paddle rip-tab: 8561070
Directions for use.
We recommend that you use the product with a buoyancy vest.
regulations for canoes-kayaks measuring less than 3.50 metres
Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft.
You must always stay within 300 metres of a shelter (any place on the coast where any craft or vessel and its crew can get to safety by anchoring or berthing, and set off again without assistance).
Buoyancy life vests are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
You must always stay within 300 metres of a shelter (any place on the coast where any craft or vessel and its crew can get to safety by anchoring or berthing, and set off again without assistance).
Buoyancy life vests are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
regulations for canoes-kayaks measuring more than 3.50 metres
Your canoe/kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is approved for sea use by the manufacturer.
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You must carry a number of items of safety equipment.
You can find a list of these items via this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You must carry a number of items of safety equipment.
You can find a list of these items via this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak
composition
composition
Bladder: 60.0% Polyvinyl Chloride, 40.0% Polyester; Floor mat: 70.0% Polyvinyl Chloride, 30.0% Polyester
Tips for storage and maintenance
Storage tips
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
Restrictions on use
Paddling up to 300 metres from shelter.
TESTS AND WARRANTY
Agree by
ISO 6185-1 standard. Category IIIB (beach craft)
Complies with French Division 240 regulations (sailing up to 300 m from shelter)
Parts guarantee
Guaranteed availability of spare parts essential to use of product: 2 years
Availability: 10 years