Product Description
#### 2-IN-1 COMBO PACK: ORYA 10' CONVERTIBLE STAND UP PADDLE KAYAK
The Orya 10' inflatable stand up paddle board is the ideal board for discovering paddleboarding with confidence. Its generous width of 81 cm and 280 L volume provide maximum stability from your very first outings, whether standing or seated.
Its greatest advantage? It converts into a kayak in just a few seconds: simply attach the removable kayak seat and assemble the 4-piece convertible paddle. One board, two sports, one purchase.
#### LIGHTWEIGHT AND EASY TO TRANSPORT
Thanks to its **Light Dropstitch** technology (single-layer knitted construction), the board weighs only 7.7 kg on its own. Inflated in just a few minutes to 13 PSI, it offers excellent rigidity for comfortable paddling. Once deflated, it fits into the included carry bag with all its accessories — convenient for car transport and travel.
Carry bag dimensions: 90 x 40 x 27 cm. All accessories fit inside.
#### HOW MANY PEOPLE CAN USE THE BOARD?
The board can be used solo or by two people:
- 1 standing adult + 1 child (seated or kneeling)
- 1 standing adult + 1 adult (seated or kneeling)
For optimal use, the paddler's weight should not exceed 130 kg.
#### HOW DO I INFLATE MY BOARD?
**Understanding your dual-action pump:**
The included high-pressure pump can inflate up to 20 PSI. It operates in two modes thanks to its red plug:
- **Red plug installed → Dual-action mode**: the pump inflates when pulling up and pushing down the piston. Twice as fast, ideal for inflation from 0 to 10 PSI.
- **Red plug removed → Single-action mode**: the pump inflates only when pushing down. Easier to use above 10 PSI when resistance increases.
**Inflation steps:**
1. Place the board on a flat and stable surface.
2. Open the valve cap and check that the valve pin is in the raised position. If not, press it down and turn it a quarter turn. Otherwise, the board will not retain air.
3. Ensure the hose is connected to the INFLATE side and connect it to the valve.
4. Leave the red plug installed → Dual-action mode (0 to 10 PSI).
5. Pump until approximately 10 PSI.
6. Remove the red plug → Single-action mode, easier above 10 PSI.
7. Finish inflating to 13–15 PSI.
We recommend stopping inflation at 13 PSI. Heat increases internal pressure, so regularly check your board's pressure in hot weather.
**Deflation:**
1. Remove the fin first.
2. Open the valve to release the air.
3. Connect the hose to the DEFLATE side of the pump and pump to extract any remaining air.
4. To fold the board, start from the end opposite the valve to completely expel the air.
#### COMPLETE PINK COMBO PACK READY TO PADDLE
Everything is included so you can get on the water as soon as you receive your board. Pink accessories included:
- Orya 10' board (305 x 81 x 15 cm) — 7.7 kg
- Kayak seat — 0.6 kg
- Hexo convertible 4-piece SUP/Kayak paddle (pink) — 1.3 kg
- Double-action high-pressure pump (pink) — 1.0 kg
- Safety leash (pink) — 0.3 kg
- Fin (pink) — 0.2 kg
- Repair kit — 0.1 kg
- Carry bag (90 x 40 x 27 cm) — 1.2 kg
**Total pack weight: 12.4 kg**
#### TECHNICAL SPECIFICATIONS
- Length: 10' / 305 cm
- Width: 32" / 81 cm
- Thickness: 6" / 15 cm
- Volume: 280 L
- Recommended pressure: 13 PSI (max. 15 PSI)
- Board weight only: 7.7 kg
- Total pack weight: 12.4 kg
- Maximum paddler weight: 130 kg
- Maximum flotation capacity to remain above water: 260 kg
- Number of users: 1 to 2 people
- Skill level: Beginner
- Suitable waters: Sea, lake, calm river
#### COMPOSITION AND MATERIALS
- Board structure: Single-layer knitted Dropstitch, Polyvinyl Chloride (PVC)
- Non-slip deck pad: EVA
- Attachment rings: Stainless steel
#### CARE AND STORAGE INSTRUCTIONS
- **After each use**: Always remove the fin immediately after leaving the water. Never walk on the board while the fin is installed, as this may break the fin box or damage the board structure. **Rinse the board with fresh water** to remove all sand and salt residues and allow it to dry naturally, always in the shade.
- **Storage and heat management**: Heat increases internal pressure and may cause irreversible damage (**bursts, delamination, leaks**). When not on the water, always keep the board in the shade and **reduce the pressure to 10 PSI** in hot weather. **Keep the board away from any heat source** (**walls, hot surfaces, car roofs**). Never leave the board exposed to direct sunlight, whether inflated or deflated.
- **Long-term storage**: For long-term storage (for example during winter), always choose a **dry, sheltered, cool and temperate location** (avoid freezing sheds or overheated attics). You may either **store it folded (without excessive compression)** in its carry bag or **leave it flat and deflated** if you have sufficient space.
- **Cleaning**: Clean with fresh water and a soft cloth. Do not use aggressive cleaning products, solvents or stripping agents.
#### WARRANTY
Manufacturer warranty: **2 years**.