The security of your belongings: THE priority!
When backpacking, what could be worse than losing your passport or getting your phone stolen?
In order to prevent this so that you can enjoy your experience with total peace of mind, we have added a large discreet and compartmented chest pocket.
You can store your phone, passport and wallet safely in one place, and even attach your keys to the built-in snap hook so you don’t lose them!
3-in-1 to adapt to every situation
With the “3-in-1” system, the jacket is perfect for cold conditions (down to 0°C). For travel in warm weather, you can leave the inner layer at home and just take the rain jacket.
You can also wear the fleece by itself like a mid-layer over a T-shirt.
3 options in one jacket!
A JACKET THAT STOPS RIPS FROM GETTING BIGGER
The jacket has also been subjected to single rip tearing tests. The aim is to reproduce in a laboratory the effect of your jacket snagging on something outdoors and being ripped. Through this test protocol, we check that once it is ripped, the fabric does not continue to tear and still protects you over time.
HOW DO I KNOW IF THIS JACKET IS DURABLE?
We carry out laboratory tests on our fabrics, according to different criteria such as abrasion (or in other words resistance to rubbing).
To reproduce the rubbing from backpack straps (on the part of the jacket put to the greatest test when backpacking), we carry out a protocol test called “Martindale”, where the jacket material rubs against another material. The aim is to note the wear limits of the product and when pilling begins.
Reflective parts
We have added reflective tabs on the cuffs.
WARNING, these parts are not standardised, they are not PPE (PERSONAL PROTECTIVE EQUIPMENT) and therefore do not guarantee safety or protection.
When you want, you can turn the tightening tab around the wrist as necessary to uncover the reflective zones.
Which size should I choose?
This jacket was designed to be worn over a double layer (fleece, sweater).
Select your usual size for the best fit.
The jacket has a mid-length cut ending at the middle of the buttocks.
You can tighten the waist thanks to the snap fasteners.
Adjust the hood using the drawcord around the face. The depth of the hood is adjusted by a Velcro tab on the back of the head.
