Product Description
The practical solution for cooling the legs after intense physical exercise. Simply soak your legs in water for 5 to 8 minutes (maximum 30 minutes*), without ice or refrigeration.
A revolution in cooling technology that facilitates recovery activated by moisture absorption and maintained by exposure to the airflow delivered by the 3D mesh. The lining is medical grade and offers hypoallergenic and antibacterial properties. The lining is medical grade and offers hypoallergenic and antibacterial properties. The material uses a unique chemistry to achieve water absorption rapide. The advanced formulation releases energy over time to provide temperatures 6-12° below room temperature.
The boot is designed to provide uniform cooling without restricting movement. Air is the element that keeps the fabric cool once it has been activated by water. The sporty 3D outer mesh allows a constant flow of air to reach the cold water material, prolonging the cooling effect of the boots. Once saturated, the cold water material is activated and provides a cool, cushioned layer that conforms to the anatomical shape of your horse's leg. Adjustable Velcro straps create compression that promotes recovery.
Our specialized Air Tech fabrics have been developed for all equine disciplines to ensure that key properties facilitate the technical performance and protection required for our products.
Recommendations
We recommend that the boots are used for no more than 2-4 hours per use. The boots can be worn in the stable or while working.
The legs must be clean before applying the boots. We recommend soaking them in cold water for 5-8 minutes before applying to the leg. Squeeze out excess water gently. Under no circumstances should the boot be applied dry.
Room temperature water can also be used as the fabric technology lowers the temperature.
*Do not soak excessively - maximum 30 minutes.
Once dry, boots should be stored in an airtight box or bag for optimal use.
If the boots reach body temperature, simply add cold water to reactivate them. The boot can be used during reactivation (left on the leg). Make sure that dry spots are checked at regular intervals, especially on hot days.
High humidity (90%) reduces the ability of the fabric to cool the product.
CAUTION
Boots should be soaked in cold water for 5-8 minutes (maximum 30 minutes*) before use to ensure complete saturation.
It is important to keep the boot saturated during use.
See our range of magnetic therapy products.
Technical details
- Advanced water absorption technology ensures cooling
- Soak in water for 5-8 minutes to activate (maximum 30 minutes*). No need for refrigeration
- Anatomical shape
- Medical grade cold water fabric
- Hypoallergenic and antibacterial
- 3D sport mesh for air circulation
- Injury prevention
- Helps tissue recovery after intense exercise
- Wrap-around design is easy to put on
- Helps reduce swelling
- Secure Velcro closure creates compression with silicone ends for easy on/off.
- Sold in pairs
- Suitable for use in the barn and while working, 2-4 hours per use
Care Instructions
DO NOT handle/fold/unfold your boots once they are dry - this may compromise the integrity of the fabric.You can dry your boots folded or open, but it is essential to soak them in the same condition they were dried in.
Always soak your compression boots in cold water before the next use.
Remove hair and mud with a brush and make sure all closures are closed.
Wash and rinse by hand.
Do NOT use detergent - it may damage the fabric.
Do not expose boots to direct sunlight as this may cause fabric deterioration.
Once dried, the fabric will become stiff. Be sure to soak it before the next use.
DO NOT bleach
DO NOT tumble dry
DO NOT
