Product Description
A three-ring Dutch gag usually consists of four rings in total, but only three rings to which you can attach the reins, hence the name. The top ring attaches to the cheeks of the bridle and you can attach the reins to any of the three bottom rings to have a variety of different leverage options.
Also known as a bit continental, it works by lifting the bit into the horse's mouth in the same manner as a traditional gag, but without the same severity. Using the reins on the lower rings significantly increases the pressure of the poll, so we recommend using two reins or rounding's attached to one rein when using these rings. This allows proper contact to be maintained on the snaffle ring without pressure on the neck when necessary.
The rubber mouthpiece softens the action of this bit and the copper pad encourages the horse to accept the bit and helps reduce the nutcracker action of a single-joint bit. This bit may be a good choice for cavaliers who need a little more control for jumps or work rapide.
Measurements
According to our size guide, the A and B measurements of this bit are as follows:
5.5' - A=15mm & B=180mm
Rubber bits for horses...
Rubber coated bits generally have thicker mouthpieces, making them softer and ideal for horses with sensitive mouths or those who don't like metal bits. Our rubber bits have been heat treated to make them softer to the touch and more durable. Due to their thicker mouthpiece, they may not be suitable for horses with small mouths or large tongues.
Pair your three-ring bit with one of our anatomical bridles.
For health and hygiene reasons, this bit is not returnable if removed from the model.
Technical details
- Durable rubber mouthpiece with copper insert
- Use the lower rings with two reins or rounds attached to one rein for maximum effect.
- Exerts pressure on the horse's head with limited gagging action.
- Ideally used by experienced cavaliers
- This bit is not BD approved
- Bit strength: Moderate
Care Instructions
To promote good hygiene and protect the longevity of your horse bit, we recommend the following maintenance regimen after each use.
1. Rinse your bit after each use under a faucet to remove any saliva or debris from the surface.
2. Use a sponge or soft cloth to wipe any excess debris from the bit, paying particular attention to the joints and hinges.
3. Allow to dry naturally.
