Convertible Inflatable SUP/Kayak Package (130 kg max) - Selka 10'

Product Description

2-IN-1 COMBO PACK: SELKA 10' CONVERTIBLE SUP KAYAK

The Selka 10' inflatable stand up paddle board offers the same versatility as the Orya 10', now in a stylish blue colourway. Its generous 81 cm width and 280 L volume provide reassuring stability for beginners looking to progress quickly, whether paddling solo or with a partner.

Its greatest advantage? It converts into a kayak in just a few seconds. Simply attach the removable kayak seat and assemble the 4-piece convertible paddle. One board, two sports, one purchase.

The kayak conversion is instant: attach the removable seat, assemble the convertible paddle and switch activities without leaving the water. Perfect for enjoying different experiences during the same outing.

LIGHTWEIGHT AND EASY TO TRANSPORT

Thanks to its Light Dropstitch technology (single-layer knitted construction), the board weighs only 7.7 kg. Inflated to 13 PSI in just a few minutes, it offers excellent rigidity for comfortable paddling. Once deflated, the board and all accessories fit neatly into the included carry bag.

Carry bag dimensions: 90 x 40 x 27 cm. All accessories fit inside the bag.

HOW MANY PEOPLE CAN USE THE BOARD?

The board can be used solo or by two people:

• 1 standing adult + 1 child (seated or kneeling)
• 1 standing adult + 1 adult (seated or kneeling)

For optimal performance, the paddler's weight should not exceed 130 kg.

HOW DO I INFLATE MY BOARD?

Understanding your dual-action pump:

The included high-pressure pump can inflate up to 20 PSI. It operates in two modes thanks to its red plug:

• Red plug installed → Dual-action mode: the pump inflates when pulling up and pushing down the piston. Twice as fast, ideal from 0 to 10 PSI.
• Red plug removed → Single-action mode: the pump inflates only when pushing down. Easier to use above 10 PSI when resistance increases.

Inflation steps:

1. Place the board on a flat and stable surface.
2. Open the valve cap and check that the valve pin is in the raised position. If not, press it down and turn it a quarter turn. Otherwise, the board will not retain air.
3. Ensure the hose is connected to the INFLATE side and connect it to the valve.
4. Leave the red plug installed → Dual-action mode (0 to 10 PSI).
5. Pump until approximately 10 PSI.
6. Remove the red plug → Single-action mode, easier above 10 PSI.
7. Finish inflating to 13–15 PSI.

We recommend stopping inflation at 13 PSI. Heat increases internal pressure, so regularly check your board's pressure in hot weather.

Deflation:

1. Remove the fin first.
2. Open the valve to release the air.
3. Connect the hose to the DEFLATE side of the pump and pump to extract any remaining air.
4. To fold the board, start from the end opposite the valve to completely expel the air.

COMPLETE BLUE COMBO PACK READY TO PADDLE

Everything is included so you can get on the water as soon as you receive your board. Blue accessories included:

• Selka 10' board (305 x 81 x 15 cm) — 7.7 kg
• Kayak seat — 0.6 kg
• Hexo convertible 4-piece SUP/Kayak paddle (blue) — 1.3 kg
• Double-action high-pressure pump (blue) — 1.0 kg
• Safety leash (blue) — 0.3 kg
• Fin (blue) — 0.2 kg
• Repair kit — 0.1 kg
• Carry bag (90 x 40 x 27 cm) — 1.2 kg

Total pack weight: 12.4 kg

TECHNICAL SPECIFICATIONS

• Length: 10' / 305 cm
• Width: 32" / 81 cm
• Thickness: 6" / 15 cm
• Volume: 280 L
• Recommended pressure: 13 PSI (max. 15 PSI)
• Board weight only: 7.7 kg
• Total pack weight: 12.4 kg
• Maximum paddler weight: 130 kg
• Number of users: 1 to 2 people
• Skill level: Beginner
• Suitable waters: Sea, lake, calm river

COMPOSITION AND MATERIALS

• Board structure: Single-layer knitted Dropstitch, Polyvinyl Chloride (PVC)
• Non-slip deck pad: EVA
• Attachment rings: Stainless steel

CARE AND STORAGE INSTRUCTIONS

• After each use: Remove the fin as soon as you leave the water, rinse the board with fresh water and allow it to dry in the shade. Never walk on the board with the fin installed.
• Heat: Heat increases internal pressure and may cause irreversible damage. In hot weather, reduce the pressure to 10 PSI and keep the board away from heat sources (walls, hot surfaces, car roofs). Never leave it exposed to direct sunlight, whether inflated or deflated.
• Long-term storage: Choose a dry, cool and temperate location. Store the board folded (without tightening it excessively) in its bag or fully deflated and laid flat.
• Cleaning: Use fresh water and a soft cloth only. Do not use solvents or aggressive cleaning products.

WARRANTY

Manufacturer warranty: 2 years.