Product Description
Inflatable outdoor seat – comfort wherever you go
Enjoy comfortable seating outdoors with this inflatable outdoor seat. Designed to be used as a camping chair, floor cushion or reclining seat, it combines an inflatable structure approximately 8 cm thick with side straps to adjust the backrest position. Its integrated inflation system allows you to fill it with air without a pump through successive compressions, while also remaining compatible with an electric pump for faster inflation. The seat weighs approximately 0.9 kg.
Technical specifications
- Product type: inflatable camping seat / cushion
- Materials: TPU nylon 40D and nylon 420D
- Inflated thickness: approximately 8 cm
- R-value: 3.0+
- Maximum load: up to 150 kg
- Weight: approximately 0.9 kg
- Inflation: integrated manual system or compatible electric pump
- Deflation: double-stopper valve for rapid air release
- Backrest: adjustable angle via side straps
- Transport: foldable, compact, storage bag included
- Edge reinforcement: approximately 6 cm
- Support elements: fibreglass
Dual inflation system
The seat features two complementary valves, allowing you to choose between manual inflation requiring no additional equipment, or inflation using a compatible pump.
Manual inflation without a pump
- Locate the integrated inflation valve at the rear of the seat (at the head end)
- Open its cap
- Compress the entire inflatable area around the valve with your hand or foot
- Release to allow the area to spring back and draw in air
- Repeat the compression / release movements successively
- Continue until the desired firmness is reached, then close the valve securely
This system acts as a pump integrated directly into the seat, removing the need to carry a separate pump. Depending on the desired inflation level, the seat can be filled quickly through repeated compressions.
Inflation with an electric pump
- Locate the large double-stopper valve
- Remove only the first outer stopper
- The internal mechanism remains in place to limit air backflow
- Position the nozzle of a compatible pump over the opening
- Inflate to the desired firmness
- Remove the pump and close the stopper securely
Rapid deflation
- Open the first stopper of the large valve
- Also remove the second internal part of the valve
- The fully open valve allows air to escape rapidly
- Progressively compress and roll up the seat to expel remaining air
- Close both parts of the valve before storing
Adjustable backrest and seating position
The adjustable side straps allow you to modify the angle between the seat and the backrest, enabling you to adopt a more upright position for eating, talking or watching an activity, or to increase the recline angle for relaxation and rest.
- Upright seated position for camping and ground-level activities
- Semi-reclined position for relaxation
- Independent adjustment according to the level of support required
- Backrest held securely in place by the side straps
Robust construction for outdoor use
The seat combines TPU nylon 40D and nylon 420D to offer a good balance between durability and portability. The internal structure distributes pressure across the entire inflatable surface, while the peripheral reinforcements contribute to maintaining the shape of the seat and backrest.
- Designed for outdoor use
- Moisture-resistant surface
- Inflatable structure distributing pressure evenly
- Reinforced edge of approximately 6 cm
- Fibreglass support elements
- Maximum stated load: 150 kg
Insulation and comfort
- Approximately 8 cm thickness insulates the user from the ground
- Stated R-value above 3.0, suitable for a variety of outdoor conditions
Pack contents
- Inflatable outdoor seat
- Storage bag
