TECHNICAL FEATURES:
Diameter: 650A
Cross section:35
Tyre bead: Stiff
Assembly: Tube Type (inner tube)
Rubber: single rubber
Puncture protection: Reinforced tyre sidewall
Carcass:22 TPI
ETRTO: 35-590
Weight: 660 g
Compatibility information:
Two references for city tyres are available in size 650:
650A, for rims with a 590mm diameter,
650B, for rims with a 584mm diameter
Be sure to check this information.
These tyres are designed to be installed only on traditional 26" rims for mountain bikes, 559mm diameter.
How to check the wear on your tyre?
Check your tyre wear, whether the tread is smooth or whether the underlayer is visible.These are the main signs of wear.Do not hesitate to change it for your safety.
How to remove your tyre
Remove the wheel and deflate the inner tube.Push the sides of the tyre to detach them from the rim.Use DECATHLON tyre levers (ref.8930710). 8930710). Insert one under the tyre to lever it out.Attach it to a spoke and repeat the operation to release one complete side of the tyre.
How to mount a tyre with an inner tube
Install one side of the tyre, respecting the direction of rotation.Insert the slightly inflated inner tube, then mount the second side, starting with the valve, to avoid pinching.
How to inflate your tyre correctly
When inflating, ensure that the tyre is correctly positioned on the rim.Then refer to the values marked on the sidewall.Adjust the pressure according to these recommendations for accurate inflation.
