Skip to main content
🚚 Selected Free Delivery for Orders Over €200 📦

DECATHLON

Sailing waterproof hat 900 black

4.8 out of 5 stars from 417 reviews
417 reviews

A waterproof hat designed for regular sailing in wet weather.

This sailing hat can replace a hood, freeing up the ears and helping you to be aware. The width of the brim stops water flowing into the collar of a jacket.

ID 8912748

€21.00
Tax included
Colour: Black

  • Pick up at Decathlon

    loading…

  • Pick up near you

    loading…

  • Home Delivery

    loading…

Design benefits

  • weight

    This hat weighs around 100 grams

  • waterproof

    Approved under simulated heavy rain (100L/m²/h) for 3h.

  • stability

    Adjustment strap under the chin

  • breathability

    3-ply breathable laminated fabric (RET < 15)

  • Features

    Design details

    How is waterproofing measured?

    We measure the resistance of a fabric to water pressure in mm of water column (based on ISO 811 ). The higher the water pressure withstood by the fabric, the more waterproof it is.
    Here are the waterproofing ratings:
    Component resistant to water pressure of 5000 mm after ageing (5 washes). This equates to 5,000 Schmerber average pressure exerted by the water during rain.
    The hat’s waterproof was tested in a rain shower with 100 litres of water/sqm/hour for 3 hours.

    Waterproof properties of the hat

    Waterproof components (water runs off the fabric)
    - 100% waterproof seams

    Fabric breathability

    To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability.
    We consider that if:
    RET < 9 = very breathable fabric
    9 < RET < 12 = breathable fabric.
    The values for the Trek 500 jacket’s breathability are as follows:
    > More resistant fabric: RET < 12 (or 3621 g/m²/24 h, JIS1099A standard)
    > Lightest fabric: RET < 8 (or 2972 g/m²/2

    Water-repellent properties information

    A fabric is water-repellent when water slides off the surface of the fabric, without seeping in.
    Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered.
    The water-repellent properties can be reactivated by putting the jacket in a dryer for 10 minutes at the lowest temperature.

    How to reactivate the water repellency

    Drying is a crucial phase in reactivating the water repellent treatment.
    We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.
    Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.

  • Usage & care

    Warranty

    2 Years

    Care Instructions

    Cleaning

    • DO NOT DRY CLEAN.

    • DO NOT IRON.

    • DO NOT TUMBLE DRY.

    • MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.

    • BLEACHING EXCLUDED.

  • Specifications

    composition

    Main fabric: 100.0% Polyester;Membrane: 100.0% Polyurethane;Inner fabric: 12.0% Elastane, 88.0% Polyester

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Material

    Recycled polyester

    Product made from 70% recycled polyester

    Read more

    Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.