FISHING ECHO-SOUNDER BRACKET FLTB SES

Design with 2 sections:

- The mount is composed of a clip-in base with straps that can be adjusted to the diameter of the side tubes of your float tube

- The sonar mount is integrated into the sounder mount

This design allows you to quickly and easily set up your echo sounder and your sonar on the mount, with the clip-in base already installed on your float tube.

In order to secure the assembly, all you have to do is insert the safety pin between the two sections.

- Sftr echo sounder bracket mount plate 16 x 5.4 cm (can be re-pierced if needed)

- Sonar mount plate: 5.5 x 6.5 cm (can be re-pierced if needed)

- Mount with clip-in base assembled on 2 adjustable straps measuring a maximum of 135 cm in length (strap width 2.5 cm)

- A mount made up of the clip-in base with 2 straps that can be adjusted to the diameter of the side tubes of your float tube or your inflatable boat. (To be left on your vessel)

- A mount with a plate (can rotate 360°), allowing you to attach the screen bracket and sonar mount onto the mobile arm.

The arm of the sonar mount is jointed and notched. This allows you to easily lift it when passing through busy areas or coming out of the water.

You can easily position your mount on the left or right side of your vessel.

This mount is designed for echo sounders measuring 4 to 7 inches. You can use it to mount some 9-inch echo sounders, depending on the model.