SHIMANO
Ref.
8822835
4960762
Road Bike Brake Pads L05A Ice Tech
€22.50
Tax included
Store Availability
Store Availability
Designed for replacing your Shimano L05A disc brake pads.
BENEFITS
Compatibility
Compatible with your brakes with Shimano L05A disc brake padsTECHNICAL INFORMATIONS
BEDDING IN YOUR BIKE BRAKES IS AN ESSENTIAL PROCESS TO ENSURE EFFECTIVE BRAKING
This involves progressively warming the pads and disc brakes to create an even contact surface .
Before bedding in, please follow these instructions:
-Clean the disc brakes. If you replace the seals, we also recommend replacing the discs.
-Get everything you'll need. Wear a helmet and make sure you have a counter or bike GPS.
-Pick a safe place. Ride on flat, dry road without any obstacles.
Before bedding in, please follow these instructions:
-Clean the disc brakes. If you replace the seals, we also recommend replacing the discs.
-Get everything you'll need. Wear a helmet and make sure you have a counter or bike GPS.
-Pick a safe place. Ride on flat, dry road without any obstacles.
BEDDING IN INVOLVES BRAKING PROGRESSIVELY SEVERAL TIMES AT INCREASING SPEEDS.
Alternate the front and rear brakes by following these steps:
Step 1: Ride 15 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Step 2: Ride 20 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Step 3: Ride 25 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Between each step, lay off the brakes and ride for a few dozen meters to air out the disc and calliper.
Step 1: Ride 15 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Step 2: Ride 20 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Step 3: Ride 25 km/h and progressively brake down to 5 km/h. Repeat 10 times.
Between each step, lay off the brakes and ride for a few dozen meters to air out the disc and calliper.
A FEW EXTRA TIPS ON BEDDING IN DISC BRAKES:
-Use one brake at a time to avoid overheating the pads.
-Ride on a flat road to avoid jolts.
-Do not brake hard while bedding in.
-Be patient. Bedding in can take up to 30 minutes.
-If you see a rainbow mark on your discs or if your braking is less effective, your brakes are "glazed". If this happens to you, feel free to visit a Decathlon Workshop.
-Ride on a flat road to avoid jolts.
-Do not brake hard while bedding in.
-Be patient. Bedding in can take up to 30 minutes.
-If you see a rainbow mark on your discs or if your braking is less effective, your brakes are "glazed". If this happens to you, feel free to visit a Decathlon Workshop.
Complete list of SHIMANO compatibility:
SHIMANO BRAKES:
BR-R9170, BR-R8070, BR-R7070, BR-R4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305,
BR-U5000, BR-RX810, BR-RX400, BR-R7070, BR-R9170, BR-RS405, BR-RS305.
SHIMANO SERIES:
SORA, 105, ULTEGRA, DURA-ACE
BR-R9170, BR-R8070, BR-R7070, BR-R4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305,
BR-U5000, BR-RX810, BR-RX400, BR-R7070, BR-R9170, BR-RS405, BR-RS305.
SHIMANO SERIES:
SORA, 105, ULTEGRA, DURA-ACE
SHIMANO ICE TECHNOLOGY
Long-lasting brake pads - the cooling wings limit temperature increases, which makes brake performance better on long descents.
Tips for storage and maintenance
Restrictions on use
Be careful not to spray with oil or grease.
TESTS AND WARRANTY
Warranty
2 Years