Detector Fox Micron RX+

Product Description

• Waterproof sealed housing
• Digital circuitry
• D-Tec™ Plus Sensing System (DTPSS) technology
• Low power consumption
• CNC machined wheel equipped with Tru-Run™ system
• Multi-color twin LEDs (Red, Green, Blue, Orange, Purple and White)
• On/off switch with two operational modes
• In night mode the two LEDs will light up discreetly in the color you program
• High quality conical speaker
• Robust 3/8' stainless steel screw thread
• Rubber inserts protect the rods
• Ergonomic and indexed volume control (8 different volume levels with the lowest completely silent)
• Ergonomic and indexed tone control (8 different tones, turn clockwise to go high)
• Intelligent, ergonomic, indexed sensitivity control with ripple elimination (8 different sensitivity levels-see NTX-R comparison table below)
• Range test function allows the user to check the detector/receiver transmission anytime, anywhere
• Low power alarm (LED turns cyan to prompt you to change batteries)
• 2.5mm output socket for illuminated swingers
• Supplied with two types of compression seals, a standard O-ring (2 per sensor) and an adjustable rigid seal
• Powered by 2 AA batteries Improved features over the NTX-R
• Deeper ears without increasing the overall height of the detector
• Multi-coloured twin LEDs, one per ear and located on top
• External LED color control with Colour Sync™- simply change the LED color with the button on the battery cover
• Manual selection of Day and Night modes
• External control of LED light output with Vari-Bright system to adapt to your current conditions (choose three light levels in Day mode and three in Night mode, via the button on the battery cover)
• More space and better drainage around the wheel greatly reducing the risk of the wheel freezing even in extreme conditions
• Longer range with the RX+ receiver
• Improved sensitivity range Sensitivity Control For all sensitivity levels (except the highest), the line must travel the specified distance in the same direction for at least 2 seconds in order to turn the detector on. Any movement in the opposite direction resets the distance counter to zero. This can drastically reduce, if not eliminate, any false hits triggered by water or wind movement. Line movement RX+ Line movement NTX-R Level 1 (Min) 90mm 74mm Level 2 73mm 56mm Level 3 56mm 48mm Level 4 34mm 40mm Level 5 17mm 32mm Level 6 11mm 24mm Level 7 5.6mm 16mm Level 8 (Max) 2.8mm 8mm