SUBEA
Ref.
8501538
2485245
SCD diving surface marker buoy with valve - Orange
€32.00
Tax included
Store Availability
Store Availability
Subea has developed a delayed surface marker buoy with valve that remains inflated. Very simple to use with a spool or a classic ballast.
BENEFITS
Ease of use
Inflatable from below, using your mouth, or with the direct system hoseAbrasion resistance
Coated fabric. Stitching protected & reinforced by protective material (braid).Flexibility
Ring to attach the spool and surface marker buoy to the outsideEasy spotting
Surface marker buoy remains fully inflated. 2 SOLAS retro-reflective strips.Content protection
Storage net directly attached to the surface marker buoy for folding itTECHNICAL INFORMATIONS
Characteristics
Stainless-steel attachment ring on the outside to use the surface marker buoy with a spool (sold separately).
Main fabric made of polyamide with a polyurethane coating that provides good resistance to abrasion and friction. Stitching protected and reinforced by protective material (braid).
It is equipped with two SOLAS reflective strips on the top to facilitate identification by the boat.
Main fabric made of polyamide with a polyurethane coating that provides good resistance to abrasion and friction. Stitching protected and reinforced by protective material (braid).
It is equipped with two SOLAS reflective strips on the top to facilitate identification by the boat.
Dimensions
Length: 147 cm.
Total length with pouch: 172 cm.
Width: 15 cm.
Thickness (rolled up): 7 cm.
Pressure relief and inflater valve.
Total length with pouch: 172 cm.
Width: 15 cm.
Thickness (rolled up): 7 cm.
Pressure relief and inflater valve.
Inflating/deflating the surface marker
The surface marker buoy can be inflated in three ways: Typically, from below, with your mouth, or with a direct system hose using the inflater. It is, thus, inflatable on the surface.
Once inflated, the air is completely trapped. This allows it to always remain completely inflated.
It is equipped with a pressure relief valve to let air out in case of overpressure, i.e. if it is too inflated, especially at depth. This valve also allows the surface marker to be deflated.
Once inflated, the air is completely trapped. This allows it to always remain completely inflated.
It is equipped with a pressure relief valve to let air out in case of overpressure, i.e. if it is too inflated, especially at depth. This valve also allows the surface marker to be deflated.
composition
composition
Main fabric: 80.0% Polyamide, 20.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE 95°C. NORMAL TREATMENT.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restrictions on use
Diving requires the certification of an instructor.
TESTS AND WARRANTY
Test product
Designed and tested in Hendaye, France by our advanced divers
Warranty
2 Years