Skip to main content
🚚 Selected Free Delivery for Orders Over €200 📦

CAPERLAN

Motorisable float tube for predator fishing FLTB 9

4.7 out of 5 stars from 89 reviews
89 reviews

We developed this float tube with a seat made of an aluminium structure to provide unequalled comfort for your sessions in large open spaces.

Optimal comfort in your long fishing sessions, thanks to the stability, modularity and storage capacity of this float tube.
Can be quickly and easily motorised with the FLTB-MTR.

ID 8560036

€620.00
Tax included
Colour: Grey

  • Pick up at Decathlon

    loading…

  • Pick up near you

    loading…

  • Home Delivery

    loading…

Design benefits

  • compatibility

    The FLTB-9 can be fitted with the FLTB MTR V2 motor, ref: 9026082.

  • easy assembly / dismantling

    The FLTB SES depth sounder support can be connected to the side bases.

  • modularity

    The 2 storage bags can be positioned to meet your needs. You can add more bags.

  • robustness

    0.7 mm thick tarpaulin with reinforced friction zone.

  • stability

    Central dropstich structure and tubeless 35 cm side air chambers.

  • repair

    Go to the SPARE PARTS section.

  • Features

    Design details

    SAFETY

    Product certified by independent technical inspection: Type 2 of the standard ISO 6185.
    This product is not intended for use by kids under 12 years of age.
    Teenagers from 13 to 17 years old must only use this product under the direct supervision of an adult.
    Always wear a life jacket.
    Refer to the local regulations and information about the dangers of float tubes and navigation.
    Maximum load: 160 kg
    Maximum motor power: 300 watts

    EQUIPMENT

    The bag contains:
    - the float tube (the 2 side bladders and the central platform are equipped with Bravo valves)
    - the raised, ergonomic and adjustable seat is made of an aluminium structure, mesh and an EVA pad for quick drying
    - 2 500 L storage bags: volume 10 L/39.5 x 23.5 x 12 cm to store your fishing accessories
    - ventilated carry bag
    - user guide and user manual
    - repair kit without glue (3 tarpaulin patches and a Bravo valves key)

    PRE-EQUIPPED FOR THE FLTB MTR MOTOR

    The FLTB-9 is pre-fitted to accommodate exclusively the FLTB MTR V2 engine (Ref: 9026082 (not supplied)
    The seat base, located under the seat, allows the motor to be clipped on quickly and easily.
    The wire guides on each side of the seat allow you to easily connect the motor to the battery (not included), which must be stored in a watertight storage bag. (not included)
    You now just have to position the control unit within reach.

    COMPATIBLE ACCESSORIES

    The following compatible accessories will make your fishing outings more comfortable: (not included)
    > The FLTB SES (8560034) can be connected to the 2 side bases: depth sounder support to easily install your electronics.
    > The side D-rings are used to attach:
    - FLTB KPN (8737484): floating keepnet to keep your catch
    - FLTB SDC (8560032): rod rack to transport your 4 sets in complete safety
    > A range of modular storage bags for your fishing accessories.

    INFLATION AND INSTALLATION

    Inflate the central dropstitch section to 10 PSI/0.7 bar, then the tubeless side bladders to 5 PSI/0.35 bar to avoid any risk of over-inflation and/or explosion.
    We recommend using the pump FLTB PLP 10 PSI (ref: 8643922) equipped with a built-in pressure gauge. (not included)
    Assemble the 2 side hoops in the seat base.
    Adjust the straps for optimal comfort.
    Clip the rear of the seat into the 2 notches and secure with the rip-tabs at the font and rear.

    DEFLATION AND STORAGE

    Remove the seat then deflate the float tube by unscrewing the valves.
    Fold the left side of the float tube onto the central part, then repeat with the right side.
    Fold in two lengthways.
    Insert the float tube into the storage bag with the seat.
    Once dry, your FLTB-9 can be stored folded inside the carry bag.
    You will extend its lifetime by storing it flat and slightly inflated.

    DIMENSIONS AND WEIGHT

    > FLOAT TUBE FLTB-9: 120 x 170 cm (width x length)
    Diameter of the side bladders 35 cm
    Weight: 13 kg (seat and inflatable structure)
    Pouch on the rear of the seat (not watertight): 30 x 14 cm (width x height)
    > SEAT:
    - dimensions of the seat: 44 x 42 x 42 cm (width x depth x height)
    - total dimensions when installed: 65 x 53 x 50 cm (width x depth x height)
    > 500 L storage bag: 39.5 x 23.5 x 12 cm /volume: 10 L
    > CARRY BAG: 80 x 55 x 35 cm

    SPARE PARTS AND REPAIRS

    The following parts are available on this web site or in our stores (to order):
    8665318 FLTB-9 CARRY BAG
    8854162 FLTB-9 SEAT
    8552219 HIGH PRESSURE VALVE
    8640993 BAKKAN 500 L
    For all work on the inflatable surfaces (to repair tears) and the valves (replacement), you are advised to take your float tube to a DECATHLON store, so that our central workshops can perform a diagnostic and make the necessary repairs.

  • Usage & care

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Once dry, your float tube can be stored folded inside the carry bag.
    You will extend the life of the float tube by storing it laid flat and slightly inflated in a dry place.

    Usage precautions

    Max load: 160 kg
    Use: fishing in calm waters

    Cleaning

    • HAND WASH. MAXIMUM TEMPERATURE OF 40°C.

    • DO NOT DRY CLEAN.

    • DO NOT IRON.

    • DO NOT TUMBLE DRY.

    • BLEACHING EXCLUDED.

  • Specifications

    composition

    Main fabric: 100.0% Polyvinyl Chloride;Metallic structure: 100.0% Aluminium;Pad: 100.0% Ethylene Vinyl Acetate

  • Testing

    Test product

    12 anglers in different countries conducted intensive tests for 1 year to guarantee a product that is ideal for fishing.

    Parts guarantee

    2 years. Tears are not covered by the warranty. If changes are made to the product, the warranty is null and void.

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Long lasting

    Reparability

    Product designed to be repairable on more than 80% of breakages and failures.

    Read more

    Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - the availability of instructions on how to repair the product for customers, - the possibility of disassembling the product, - the availability of spare parts, - the price of the repair is lower than purchasing a new product. Our goal is to cover any possible known break or repair possibility a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.