QUECHUA

Women's waterproof 3in1 travel trekking jacket - Travel 100 0° - Navy

You will appreciate this waterproof and warm 3-in-1 jacket because it can be adapted to cope with rain and provide warmth depending on the weather.

Combined with a detachable fleece, this durable jacket has multiple zipped pockets for traversing the seasons with peace of mind in varied weather conditions down to 0°C.

ID 8645363

€61.00

Tax included

Colour: Blue

Pick up at Decathlon

loading…
Pick up near you

loading…
Home Delivery

loading…

Features
Design benefits

modularity

3-in-1: It adapts to every season thanks to the removable fleece.

adjustable

Fitted at the waist with press studs, and a Velcro tightening at the cuffs

robustness

Polyamide fabric is extremely resistant to abrasion and chaffing from the bag

warmth

200g/sqm removable fleece. Comfortable down to 0°C.

weight

This jacket weighs approximately 1.12 kg in size M

waterproof

5,000 mm H²O coating (Schmerbers). Fully taped seams.

pockets

2 hand pockets with zip and 1 chest pocket on the jacket and on the fleece

Design details

3-in-1 concept for adapting to every situation

With its “3-in-1” system, the jacket is ideal for cold conditions (down to 0°C) as well as hot weather trips, as you can leave the inner layer at home, taking only the rain coat.
You can also wear the inner fleece on its own as a mid-layer over a T-shirt.
With just one jacket, you therefore get 3 options!

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm H2O (pressure exerted by a column of water). The higher this number, the more waterproof the fabric.

Water often gets in through the seams. Does my jacket have waterproof seams?

Your jacket is waterproof thanks to its fully-taped seams. Waterproof tape is added to the seams inside the garment to make them watertight so that water cannot enter through the more vulnerable areas.

How is the thermal insulation of my jacket tested?

The jacket has undergone a thermal resistance test that measures the quantity of warmth lost between the body and outside environment. The lower this temperature, the more the product preserves body heat and therefore protects it from the cold outside. We placed the jacket on thermal mannequins that reproduce the heat emitted by the body and sweating. They are placed in temperature controlled rooms that go down to -40°C.

At which temperature will I be protected?

The 3-in-1 NH100 jacket has been certified for temperatures down to 0°C. This means that it provides thermal comfort down to that temperature, if you wear the fleece with the waterproof jacket.

Which size should I choose?

This jacket was designed to be worn over a second layer garment (fleece, sweater). Select your usual size for the best fit. The jacket has a longline cut that stops at the middle of the buttocks. You can tighten the waist thanks to the snap fasteners. Adjust the hood using the drawcord around the face. Its depth is adjusted by a rip tab at the back of the head.
Usage & care
Warranty

2 Years

Care Instructions

Storage tips

Always dry this waterproof protective garment thoroughly before storing.

Cleaning

DO NOT DRY CLEAN.

DO NOT IRON.

DO NOT TUMBLE DRY.

MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.

BLEACHING EXCLUDED.
Specifications

composition

Main fabric: 100.0% Polyamide;Lining: 100.0% Polyester;Hood fabric: 100.0% Polyamide;Coating: 100.0% Polyurethane
Testing

Test product

This jacket was first tested in the laboratory, on a whole set of factors (warmth, waterproofing, durability). It was then tested by a small panel of users, at the heart of our global development centre, to assess the comfort, fit and practical features. Finally, it was inspected in the field by volunteer customers as part of a test mission, as are several of Decathlon’s products
Environmental impact

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Learn more about our approach

Material

Recycled polyamide

Textile part made of 37% recycled polyamide

Read more

This product is made with recycled polyamide (instead of conventional polyamide). Objective: to use a recovered material, transformed from production scraps or products destined to be thrown away, rather than using new oil resources to reduce the environmental impact of this product. And this, without compromising the technical qualities!

Material

Recycled polyester

Textile part made of 37% recycled polyester

Read more

We have incorporated recycled polyester into this product (instead of conventional polyester, which is itself derived from petrochemical plastic). What does this mean? In addition to being technical, this product has been designed taking into account its environmental impact: using recycled polyester means recovering and transforming products destined to be thrown away, such as production offcuts or plastic bottles, instead of using new oil resources.

Process

Biton

8% of the fabric color is made by dyeing only one yarn out of two

Read more

Dyeing textiles requires the use of lots of water, whilst also generating water waste from dyeing vats. To reduce this environmental impact, we use just one dyed mass-coloured thread out of two out, subsequently reducing our consumption of water and our impact on it.