The story behind this product
Our team of enthusiastic mountain bikers created this tyre from start to finish: from drawing up the specifications, to designing the profile and choosing the materials. By handling the entire design process ourselves, we can be confident we're offering you a quality tyre with the best possible performance
Numerous versions have been tested on varied, demanding terrain throughout Europe (Italy, Spain, France, Belgium, Czech Republic, the UK, and more) by testers of all levels
Features
Diameter: 27.5"
Width: 2.6
Tyre bead:flexible
Mount: Tubeless Ready (requires the use of sealant)
Rubber: bi-compound (specific to electric mountain bikes)
Puncture protection:nylon reinforcement on the sidewalls
Carcass:60 TPI
ETRTO: 66-584
Weight: 1250 g
How to check the wear on your tyre?
To check the wear on your e-MTB tyre, look at the tread.An MTB tyre should be replaced if you notice that the underlayer is visible or that the tread pattern has completely disappeared.Do not wait if you notice any of these signs.
How to remove your tyre
To remove your e-bike tyre, remove the wheel and deflate the tyre.Push the edges of the tyre to lift it off the rim.DECATHLON tyre levers (ref.8930710) are essential at this stage.Insert a tyre lever under the tyre, lever it up and flip it over the rim.Attach it to a spoke and continue around the rim to release the tyre on one side.Then pull on your tyre to remove it completely from your rim.
How to assemble your tubeless ready tyre
To begin, install the tubeless valve (ref.8817242). Mount the compatible electric bike tyre, one side at a time, starting at the valve.Once the tyre is in place, inflate it until you hear a 'pop'.Deflate the tyre by pressing on the core.Remove the valve cap, then insert the preventive liquid (Ref.8814747) through the valve.Replace the valve cap, re-inflate, then spin the wheel to distribute the liquid evenly.
How to inflate your tyre correctly
Before inflating, check that the tyre is properly seated on the rim.Then refer to the information on the sidewall of the tyre.Adjust the pressure according to these values to ensure proper inflation.
