CAPERLAN
Ref.
8737058
4516162
SOFT SHAD LURE WXM MOGAMI 90 7/10 G KIT NATURAL
€9.00
Tax included
Store Availability
Store Availability
Our fishing designers developed this shad for predator fishing.
Available in three sizes (70/90/120 mm) and four colours.
BENEFITS
Ease of use
This technology reduces the risk of snagging in dense environments.Fast acting
Exclusive wire that allows the weight of the jig to be changed quickly.Fish friendly
The weight of this soft lure is lead-free.Sensitivity
The stainless steel sinker jig head produces high resonance.Visual efficiency
The four colours allow for fishing in any conditions.Vibration
The paddle produces good amplitude and a high frequency.TECHNICAL INFORMATIONS
DESCRIPTION
The exclusive wire allows you to change your sinker jig heads quickly and without any glue.
The exclusive hook is ultra-sharp and thick, with a matt grey finish.
The oversized hook ring guarantees high mobility and reduces the risk of the hook becoming detached during combats.
The ultra-supple, phtalate-free PVC material allows for:
- swimming, even at very low speeds.
- easy release of the hook when attacking,
- reduced risk of becoming detached during combats.
The exclusive hook is ultra-sharp and thick, with a matt grey finish.
The oversized hook ring guarantees high mobility and reduces the risk of the hook becoming detached during combats.
The ultra-supple, phtalate-free PVC material allows for:
- swimming, even at very low speeds.
- easy release of the hook when attacking,
- reduced risk of becoming detached during combats.
RIGGING TIPS
0/ Do not position a sinker jig head on the wire
1/ Position the wire in the pre-drilled gooves in the tail of the shad
2/ Secure the hook on the inner loop of the wire, with the tip pointing upwards
3/ Insert the tip of the hook in the pre-drilled groove in the tail of the shad
4/ Slide the sinker jig head on the wire
5/ Attach your lure to the snap of your line to secure the jig.
1/ Position the wire in the pre-drilled gooves in the tail of the shad
2/ Secure the hook on the inner loop of the wire, with the tip pointing upwards
3/ Insert the tip of the hook in the pre-drilled groove in the tail of the shad
4/ Slide the sinker jig head on the wire
5/ Attach your lure to the snap of your line to secure the jig.
TECHNICAL FEATURES
- Length: 9 cm
- Lead-free sinker jig heads, 7 and 10 g
- Ultra-supple, phtalate-free injected PVC formulation
- Stainless steel wire
- Exclusive ultra-sharp and thick hook with a matt grey finish
- Stainless steel snaps.
- Lead-free sinker jig heads, 7 and 10 g
- Ultra-supple, phtalate-free injected PVC formulation
- Stainless steel wire
- Exclusive ultra-sharp and thick hook with a matt grey finish
- Stainless steel snaps.
RECOMMENDED EQUIPMENT
We recommend using this soft lure with:
- 12/100 braid
- 25/100 fluorocarbon leader
- size 2500 reel
- a rod with M casting weight
We advise you to use the snaps contained in this kit.
- 12/100 braid
- 25/100 fluorocarbon leader
- size 2500 reel
- a rod with M casting weight
We advise you to use the snaps contained in this kit.
composition
composition
Bottle body: 100.0% Polyvinyl Chloride; Metallic structure: 100.0% Stainless Steel
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store your lures and sinker jig heads in a box, away from any light and heat.
TESTS AND WARRANTY
Warranty
2 Years