BTWIN
Ref.
8765962
4659438
Rear Derailleur 6/7-Speed Shimano Tourney RD-FT35-A-SS
€13.00
Tax included
Store Availability
Store Availability
Replacing your Shimano mountain bike 6/7-speed derailleur
BENEFITS
Compatibility
Interchangeable with the Shimano 6/7-speed mountain bike systemRepair
Repair your product and give your equipment a second life!TECHNICAL INFORMATIONS
Technical features
Less maintenance due to the adapted structure
Double tension rear derailleur
Cable guide pulley for great resistance to cable tension
Over 20% lighter than the RD-FT30 (DATT: -70 g, ROAD chainset: -90 g, BMX chainset: -80 g) (mainly due to the cable guide pulley)
Profile is low enough and with enough distance from the ground to prevent the rear derailleur from hitting obstacles
Redesigned look (RD-FT55)
Double tension rear derailleur
Cable guide pulley for great resistance to cable tension
Over 20% lighter than the RD-FT30 (DATT: -70 g, ROAD chainset: -90 g, BMX chainset: -80 g) (mainly due to the cable guide pulley)
Profile is low enough and with enough distance from the ground to prevent the rear derailleur from hitting obstacles
Redesigned look (RD-FT55)
TECHNICAL FEATURES (2)
Interchangeable with the Shimano 6/7-speed mountain bike system
Only for use in front
Compatible with an 11-tooth large cog (total capacity 17T)
Only for use in front
Compatible with an 11-tooth large cog (total capacity 17T)
Assembly instructions
When replacing your derailleur, check the condition of the cables. If the cable is rusted or frayed, replace it.
Check that the derailleur hanger is properly aligned in order to adjust it. Replace or reposition it if needed.
Check that the derailleur hanger is properly aligned in order to adjust it. Replace or reposition it if needed.
Care tips
Clean your derailleur with warm, soapy water.
Avoid degreasing products, which damage plastics.
Avoid degreasing products, which damage plastics.
NEED HELP?
The technicians at your Decathlon store workshop are available to help you replace the parts of your bike. Feel free to ask them for help!
composition
composition
Main part: 10.0% Polyamide, 90.0% Steel
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
TESTS AND WARRANTY
Warranty
2 Years