Filters 0
Filters 0
BTWIN Ref. 8789259 4772740

Women's City Cycling Night Visibility Warm Rain Jacket 540 - Black

€95.00
Tax included
Colour: BLACK / BEIGE
  • BLACK / BEIGE
  • BROWN / GREY
Size guide My size is :
Not available

Store Availability

Looking for effective protection from the cold and wind when cycling? This warm jacket is just what you need, and will also keep you visible at night.

BENEFITS

Water repellent

Special treatment that makes water slide off the fabric's surface.

Visibility

Be seen at night from 50 m away, 360°, thanks to the reflective bands.

Adjustable

Adjustable hood, with a drawstring and rip-tab.

Warmth

The wadding keeps you warm in temperatures down to 0°C.

Waterproof

The fabric withstands 15,000 mmH2O before washing and 5,000 mmH2O after washing.

Pockets

3 zip-up pockets including 1 chest pocket.

Ventilation

Stay nicely ventilated thanks to the zipped openings under the arms.

TECHNICAL INFORMATIONS

WATERPROOFING IS:

- A WATER-REPELLENT TREATMENT

A fluorine-free chemical recipe placed on the fabric's surface to make water slide off it. This treatment can be reactivated by heat (10 minutes in the tumble drier on a gentle cycle).

- A WATERPROOF CONSTRUCTION

The aim is to avoid water getting in through the holes in the seams by placing a waterproof strip under the seams.

- A WATERPROOF FABRIC

A fabric's capacity to prevent water from penetrating it.

MEASURING WATERPROOFING

Waterproofing is measured in Schmerbers or mmH2O (the pressure exerted by a water column).

A material with a rating of 10,000 mmH2O can resist 10 metres of water.

The bigger the number, the more waterproof the fabric.

NIGHTTIME VISIBILITY

This jacket is certified as PPE under standard NF EN17353. Cyclists can ride safely at night thanks to the certified reflective bands around the arms and torso.

The reflective parts have been positioned based on the constraints of cycling (leaning forwards, wearing a backpack, signalling with your arm, etc.) to guarantee 360° visibility at night from up to 50 m away when picked up by car headlights.

CYCLING-SPECIFIC CUT

Its elasticated, fitted shape covers the lower back, arms, neck and wrists while cycling, providing excellent protection.

Ribbed cuffs to stop air getting in.

There are vents under the arms to help air circulate. Equipped with 2 hand pockets and an external chest pocket with a zip fastening for added security.

The hood tucks into the neck and can be worn over your helmet or without your helmet if you're walking

COMPONENT BREATHABILITY

Hydrophilic coating (RET = 12): limits condensation inside the garment. To see whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more the fabric lets water vapour produced by the body escape, and the more breathable it is.

For example: RET < 9 = extremely breathable fabric. 9 < RET < 12 = highly breathable fabric. 12 < RET < 20 = breathable fabric. RET > 20 = slightly or not breathable fabric.

composition

composition

Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Lining: 100.0% Polyamide; Rib fabric: 100.0% Polyester; Membrane: 100.0% Polyurethane

Tips for storage and maintenance

MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT. MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED. BLEACHING EXCLUDED.
DO NOT TUMBLE DRY. DO NOT TUMBLE DRY.
DO NOT IRON. DO NOT IRON.
DO NOT DRY CLEAN. DO NOT DRY CLEAN.

Storage tips

Always make sure that this protective, waterproof garment is completely dry before putting it away. Store on a hanger in a clean,dry place.

Restrictions on use

You will not be visible at night without a light source.

TESTS AND WARRANTY

Test product

We perform 3 tests on our waterproof products: - Waterproof fabric: We use Japanese standard JIS 1092. - Water-repellent treatment: According to ISO 4920 before and after washing, to guarantee the efficiency of the water-repellent treatment. The water repellency is scored on a scale of 0 to 5 (5 being the best performance). - Waterproof assembly: We follow specific design rules and use a shower test that simulates different intensities of rainfall to check our compliance with these rules.

Warranty

2 Years

Agree by

This jacket is an item of personal protective equipment (PPE) that makes the wearer more visible. It has been tested for compliance with CE standards by a notified body: SGS Fimko, no. 0598, Takomotie 8, 00380 Helsinki, Finland. The CE test was performed on the basis of the requirements of standard NF EN17353 for category 2 PPE.

Videos

Ecodesign approach

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

Ecodesign actions on this product
  • Picture showing Recycled polyester
    Material

    Recycled polyester

    Product made from 22% recycled polyester

    Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.

  • Picture showing Recycled polyamide
    Material

    Recycled polyamide

    Product made from 13% recycled polyamide

    Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 30%.

  • Picture showing Dope dyed
    Process

    Dope dyed

    Product made from 51% dope dyed yarn

    Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.

Learn more about our approach