Skip to main content
🚚 Selected Free Delivery for Orders Over €200 📦

BTWIN

Warm, Waterproof Removable City Bike Cuffs 940 - Grey

4.5 out of 5 stars.
135 reviews

An alternative to gloves, these waterproof, comfortable cuffs will protect your hands from the cold and rain during your rides.

Keep your hands warm and dry with these handlebar muffs. One size.
These handlebar muffs are partly made of polyester.

ID 8797364

€32.00
Tax included
Colour: Grey

  • Pick up at Decathlon

    loading…

  • Pick up near you

    loading…

  • Home Delivery

    loading…

  • Features

    Design benefits

    • compatibility

      Adapt your cuffs to a wide variety of bikes (flat/rounded handlebar)

    • easy dressing

      Easily attach the cuffs with the tightening system (rip-tabs and drawcord).

    • visibility

      Stay visible at night with reflective strips.

    • warmth

      Protect your hands from the cold with the wadding inside these cuffs

    • windproof

      Protect your hands from the wind with the coated component.

    • waterproof

      The fabric withstands 5,000 mmH2O before washing and 3,000 mmH2O after washing.

    • stability

      The cuffs' good hold makes it easy to take them on and off your hands.

    Design details

    Warmth and comfort

    These cuffs are made of a layer of coated, windproof, waterproof fabric, a soft and comfortable layer to keep your hands warm, and a stiff layer between them to hold the cuffs in place as you ride.
    The reflective strips on these cuffs ensure night-time visibility. Product dimensions:35 x 30 cm
    One size.

    COLD SENSITIVITY

    Everyone responds differently to the cold, and some people are more sensitive than others.
    There are several factors that help explain the differences in feeling:
    > the intensity of the activity
    > each individual's metabolism
    > blood circulation
    > etc..
    The cuffs can be used with or without gloves.

    WATERPROOFING IS:

    - A WATER-REPELLENT TREATMENT
    A fluorine-free chemical recipe placed on the fabric's surface to make water slide off it. This treatment can be reactivated by heat (10 minutes in the tumble drier on a gentle cycle).
    - A WATERPROOF CONSTRUCTION
    The aim is to avoid water getting in through the holes in the seams by placing a waterproof strip under the seams.
    - A WATERPROOF FABRIC
    A fabric's capacity to prevent water from penetrating it.

    MEASURING WATERPROOFING

    Waterproofing is measured in Schmerbers or mmH2O (the pressure exerted by a water column).
    A material with a rating of 10,000 mmH2O can resist 10 metres of water.
    The bigger the number, the more waterproof the fabric.

    HOW IS THE USE TEMPERATURE MEASURED?

    Our cuffs are tested using a thermal hand in a lab with temperatures from 5°C to -20°C and winds from 10 km/h to 25 km/h.
    The City Bike Cuffs 940 are rated 5 out of 5 for warmth.
    Recommended temperature: -10°C
    Limit temperature: -20°C

    ATTACHING THE CUFFS TO THE HANDLEBAR

    1) Insert the cuffs with the reflective strips on top
    2) Fasten the rip-tabs
    3) Tighten the drawcord
    The cuffs are suitable for straight and curved handlebars (city bikes).
    These hand warmers are easy to put on your handlebar. Once installed on the handlebar, they are held in place by rip-tabs. These cuffs make it easy to use the brake levers and gear shifters.

  • Usage & care

    Warranty

    2 Years

    Care Instructions

    Storage tips

    Leave to dry out after use. Make sure to properly fasten the rip-tab to avoid damaging your other clothes.

    Usage precautions

    Not suitable for standard road bike handlebars.

    Cleaning

    • DO NOT WASH.

    • DO NOT DRY CLEAN.

    • DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.

    • DO NOT IRON.

    • BLEACHING EXCLUDED.

  • Specifications

    composition

    Main fabric: 100.0% Polyamide;Padding: 100.0% Polyester;Lining: 100.0% Polyester;Coating: 100.0% Polyurethane

  • Testing

    Test product

    This product has passed a waterproofing test of 60 L water / sqm / hour for 2 hours. This test reproduces the average conditions of a rain shower in the city.These cuffs have also passed a thermal resistance test in a laboratory.

    Agree by

    Our team of co-creators, who helped us throughout all steps of the product's design (ideation, colour choice) as well as in the final testing phase with use tests in the field.

  • Environmental impact

    With ecodesign, we reduce the environmental impact of our products.

    Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.

    Learn more about our approach
    Process

    Dope dyed

    40% of the fabric color is made by dyeing the yarn at the source

    Read more

    Dyeing textiles requires lots of water but also leads to lots of water waste generated in dyeing vats. To reduce this environmental impact, we choose solution dyeing, which integrates colour pigments when manufacturing the thread.

    Material

    Recycled polyester

    Textile part made of 60% recycled polyester

    Read more

    We have incorporated recycled polyester into this product (instead of conventional polyester, which is itself derived from petrochemical plastic). What does this mean? In addition to being technical, this product has been designed taking into account its environmental impact: using recycled polyester means recovering and transforming products destined to be thrown away, such as production offcuts or plastic bottles, instead of using new oil resources.