BTWIN
Ref.
8821242
4914480
Hydraulic Brake Kit T275 PM 850 mm Left
€60.00
Tax included
Store Availability
Store Availability
For replacing the hydraulic braking kit on your bike.
BENEFITS
Capacity
Lever, sheath and caliper. WITHOUT disc.
Repair
Repair your product and give your equipment a second life!TECHNICAL INFORMATIONS
Supplier description
Leisure - hydraulic disc brake system
Open, double piston system
Easy installation, adjustment and maintenance.
Open, double piston system
Easy installation, adjustment and maintenance.
Compatible rotor
1.8 mm-thick compatible rotor
lever
Aluminium lever and cast aluminium mount
Reach adjustment
One-piece mount
3-finger blade
Finish: Black
Reach adjustment
One-piece mount
3-finger blade
Finish: Black
Caliper
Forged aluminium body
Finish: Black
Finish: Black
oil
Easy replacement
Non-corrosive fluid mineral oil
Excellent thermal expansion properties
Non-corrosive fluid mineral oil
Excellent thermal expansion properties
Weight
rear +- 300 g
(excluding rotor, adapter and mounting bolts)
(excluding rotor, adapter and mounting bolts)
Assembly instructions
Always tighten to the recommended torque.
After installing the brakes kit, follow the bedding-in procedure.
For the best braking, it's recommended that you use discs made by the same brand as your brake calipers
After installing the brakes kit, follow the bedding-in procedure.
For the best braking, it's recommended that you use discs made by the same brand as your brake calipers
CARE TIPS
Bleed the brakes once per year or each time you change the pad.
When changing the pads, you must bleed the brakes.
When servicing your bike, make sure you don't splash any oily liquids on the disc or brakes as this will reduce their braking power.
When changing the pads, you must bleed the brakes.
When servicing your bike, make sure you don't splash any oily liquids on the disc or brakes as this will reduce their braking power.
NEED HELP?
The technicians at your Decathlon store workshop are available to help you replace the parts of your bike. Feel free to ask them for help!
composition
composition
Main part: 93.0% Aluminium, 4.0% Stainless Steel, 3.0% Steel
Tips for storage and maintenance
DRYING IN A TUMBLE DRYER POSSIBLE. NORMAL TEMPERATURE, MAXIMUM EXHAUST AIR TEMPERATURE OF THE DRUM 80°C.
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
IRON AT A MAXIMUM SOLEPLATE TEMPERATURE OF 150°C.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
Storage tips
Store the brake kit in a cool, dry place away from corrosive products and salty air.
Restrictions on use
Get the compatibility and assembly checked by a technician
TESTS AND WARRANTY
Warranty
2 Years