Kids’ progressive swimming pool armbands-waistband - Tiswim yellow lion

The TISWIM progressive swimming pool armbands-waistband is designed to be used by kids (15-30 kg) when discovering the water.

1 product, 3 possibilities! With an ultra-compact design, the armbands-waistband helps kids in the various stages of learning to swim, from vertical to horizontal positioning.

ID 8919934

€10.00

Tax included

Colour: Yellow

Pick up at Decathlon

loading…
Pick up near you

loading…
Home Delivery

loading…

Features
Design benefits

compact design

When deflated, the Tiswim armbands-belt can be easily slipped into your bag

modularity

The 3 ways of using them adapt to the kid’s level of comfort in the water

buoyancy aid

Certified standard EN 13138-1 reinforced buoyancy at 70 Newtons complete product

Design details

The stages of aquatic awakening

There are 3 stages to discovering water:
- Familiarisation: build trust and overcome apprehension through fun games. The kid gets used to water.
- Immersion and breathing: control your breathing to feel safe and put your head under water.
- Floating and moving: develop independence and discover how the body behaves in water before moving around alone.
A progressive, fun-filled course for a successful introduction to water!

Why use adaptable armbands?

Given the fact that it’s often difficult to find the correct flotation aid for your kids and to anticipate how well they take to the water and their confidence, we designed the new Tiswim. With its modular design, this progressive armband lets kids discover the pleasure of playing in the water, moving around and learning their first swimming movements in complete safety.

What are the 3 ways of using the Tiswim?

Step 1/Initially, the Tiswim is used with all the parts (armbands + belt in front)
Step 2/Armbands only, to start moving in the water in a vertical position
Step 3/Belt only positioned at the back to discover the swimmer’s position (horizontal) and the first movements of swimming.

Secure fastening system

The adjustment strap on the front chamber is equipped with a 3-point buckle to prevent the kid from removing it themselves.
The buckle requires at least two simultaneous or sequential actions to prevent unintended opening.

How does the valve work?

The TISWIM progressive armbands-waistband have PVC one-way inflation valves.
To inflate the product correctly, press the base of the valve to open it.
The valve closes mechanically in about 2 seconds. As such, it is normal for a bit of air to escape after inflation. This is why you must close the cap quickly.

How much should I inflate the different parts of the Tiswim?

The armbands are always inflated to the maximum. However, you should ideally inflate the second chamber directly on your kid’s arm.
It’s best to inflate the belt before putting it on your kid, when it’s going to be used in a front or back position.

How can I adjust the belt in the front position?

When the product is optimally used. Inflate the front chamber, and position it on your kid’s chest. Tighten the strap on the back, as you usually would. When in use, make sure that the front chamber doesn’t rise up to your kid’s chin, to avoid it rubbing. If needed, don’t hesitate to reposition the product on your kid’s torso.

Recommendation to avoid premature discolouration

After use, rinse your product and do not leave it in direct sunlight.
Usage & care
Warranty

2 Years

Care Instructions

Storage tips

Rinse with clean water, allow to air dry and store away from sunlight in a dry and well-ventilated place.

Cleaning

DO NOT WASH.

DO NOT DRY CLEAN.

DO NOT IRON.

DO NOT TUMBLE DRY.

BLEACHING EXCLUDED.
Specifications

composition

Main fabric: 100.0% Polyvinyl Chloride;Buckles: 100.0% Polyoxymethylene;Webbing: 100.0% Polyester;Side seam fabric: 100.0% Polyester;Elastic: 8.0% Elastane, 92.0% Polyester
Testing

Test product

This product has been tested in use in Hendaye and has been subjected to numerous laboratory tests to guarantee the quality of use for which it was designed.

Agree by

The Tiswim progressive armbands-waistband complies with buoyancy aid standard EN 13138-1 for learning to swim. Its buoyancy volume significantly exceeds the standard requirements (70.1 newtons when the product is complete, 42.6 Newtons for the armbands alone with a standard requirement of 25 N, and 27.5 Newtons for the belt alone, with a standard requirement of 15 N)
Environmental impact

With ecodesign, we reduce the environmental impact of our products.

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Learn more about our approach

Environmental Impact

Designed to reduce environmental impact

Product made with a CO2eq reduction of 50% compared to the previous or similar product

Read more

Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.