men’s long-sleeved surf t-shirt UPF50+ - white flower
This UV-protection t-shirt is ideal for surfing in warm water, for sessions lasting up to one hour
Long-sleeved anti-UV t-shirt to protect you from the effects of the sun, even in the water. It also reduces irritation from contact with the board. Loose fit for ease of dressing and movement
BENEFITS
Reduced chafing
Reduces rubbing against the surfboard or bodyboard. 1-hour sessions.
Sun protection
UPF 50+ fabric. Long-sleeved. Blocks at least 95% of UV rays, even when wet.
Resitant to impact of waves
Loop to connect the bottom of the t-shirt to boardshorts.
Easy maintenance
The textile mesh prevents grains of sand from getting stuck.
TECHNICAL INFORMATIONS
Behaviour when in the sun
Although this t-shirt provides protection from the sun, phenomena such as reflections (from the water, sand, etc.), heat, time of day, etc., must be taken into account.
Wearing this t-shirt does not exempt the wearer from adopting suitable behaviour: wear sunglasses, wear a hat or cap, regularly apply an appropriate sun cream, drink regularly, etc.
Multi water sports UV protection t-shirt
Our UV tops are designed to meet the needs of the most demanding surfers.
Our design choices also make them compatible with other water sports such as swimming, kite surfing, windsurfing, wakeboarding, water skiing, sea wading or SUP (stand up paddle boarding).
Warmth and wind
The minimum water temperature recommended for the use of this UV-protection t-shirt is 22°C. Air temperature may increase or decrease this recommendation.
Our thermal models (over 2 h) are made of either fleece, neoprene or both. The presence of wind can have an impact which can be uncomfortable as soon as the wind exceeds 15 km/h: In this case, choose a model with neoprene.
Support system
This UV protection water t-shirt has a loop at the front to attach the cord of your swim shorts to stop the top from riding up while you surf. This solution is recommended for sessions up to 1 h. For more than one hour, we recommend that you choose the UV top 500, which also has a drawstring at the hips for better stability. Unwanted riding up of the top could cause irritation to the lower abdomen.
What does UPF 50+ mean?
UPF is a sun protection factor (Ultra Violet Protection Factor) and is standardised worldwide.
It defines the protection level of a fabric and more precisely the proportion of UV rays it lets through.
To meet the standards, it must block at least 95% of UV rays. UPF 50+ means that the fabric blocks at least 95% of UVA and 98% of UVB rays.
UV protection even when wet
It can be used both in and out of the water, for water or nautical sports. Chlorine-resistant.
How to choose your UV protection t-shirt (Part 2: According to the duration of the session)
1 hour: Occasional practice. You can choose between a loose fit (priority to ease of dressing and comfort when dry) or a fitted cut (priority to comfort when wet). A loop system to connect it to the shorts ensures the stability of the product.
2 hours: Regular practice. Comfort when wet is enhanced by the seamless panels under the arms and the drawstring which further increases stability.
3 hours: Intensive practice. Additional warmth to help you stay in the water for longer.
How to choose your UV protection t-shirt (Part 1)
All of our UV-resistant t-shirts are UPF50+, i.e. they have the maximum level of sun protection.
The choice between them will therefore be made based on the length of the sleeves and will depend on what it will be used for. The constraints are greatest for surfing so we decided to build our range primarily for surfing.
For surfing, the choice will be made according to the duration of your sessions: 1 hour, 2 hours or 3 hours.
composition
composition
Main fabric: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Water > 22°C. Sun protection even when wet. Filters 95% of UV.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory tested to ensure the best quality
Warranty
2 Years
Agree by
All of our sun protection components are laboratory-tested by our engineers. They meet the current standard: EN 13758-2. We conduct tests on all of the materials used before starting production. We also have our own measuring equipment in our laboratories to supplement the tests conducted in external laboratories. Products are laboratory tested when wet and dry as well as in use whilst worn (with the stretch that occurs during use).
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 99% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessGreige
Product made from 99% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.