What is ZIPROTEC?
At Decathlon, we make it a priority to offer you products that make your kids' lives easier and protect them. The ZIPROZEC enables you to combine the jacket with the mountain biking and the junior ski and snowboard back protector – DBCK 500 JR (8585102).
It's simple, the ZIPROTEC is
_ An additional zip on the inside of the jacket,
_ A hook at the top of the back of the jacket.
So, no need to worry, has your kid got their jacket on? If so, they are protected from any bumps.
Advantages of the ZIPROTEC feature
_ freedom: You attach the back protector to your child's jacket in the evening or at the beginning of the ski trip.In the morning, when you leave (it’s always a rush), if your child has their jacket on, then they have their back protector on: they are protected
_ comfort: You forget wearing the back protector, it follows your body's movements and most importantly, it doesn’t ride up
_ practice: during lunch break, if they take off their jacket, they also remove the back protector, all at once.
How can you prevent the snow from getting in?
This kids’ snowboard jacket (or kids’ ski jacket, that works too) is designed to stop snow getting inside:
_ on the back: snow skirt + long cut
_ wrists (very exposed area): long sleeves + cuffs with thumb holes to stop snow from entering
_ at the neck: collar with a high gusset / hood with rip-tab to keep it rolled in high position and protect the neck.
The hood can also be worn over a helmet.
Stops snow from getting inside - focus on the very sensitive wrist area
This jacket has been developed and tested with the MI 500 JR PROTECT snowboard mittens which go under the jacket so that kids can easily pass the mittens through the sleeve on their own (from 8 years upwards - at 6 years old it's still complicated). Then there are a host of features to keep the snow out
1. jacket sleeve with thumb loop to prevent the sleeve riding up,
2. the mitten reaches high up the wrist
, 3. the jacket sleeve then covers everything.
How is the waterproof rating of this ski suit’s fabric verified?
As well as the waterproof fabric, we enhance the waterproofing of our kids' snowboard jackets, or our kids’ ski jackets, with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight.
On this SNB JKT 500 jacket, 100% seams are taped.
How many pockets does this jacket have?
This Decathlon kids’ snowboard jacket is designed for regular to intensive snowboarding, so it has all the pockets required:
_ 2 side pockets closed with a zip,
_ 1 external chest pocket closed with a zip,
_ 1 interior mesh pocket for a buff, goggles, etc.
_ 1 ski pass pocket on the left sleeve closed with a zip.
Hood rolled under the helmet
When snowboarding, snow can get in the jacket during a fall. To limit this unpleasant experience, the collar and hood were designed together.
So that the hood can be used as a scarf and keep the snow out, fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet.
The collar must be closed normally, up to the top to keep everything tight.
Does the hood fit over a ski helmet?
The hood of this jacket is designed to fit over a helmet, in case of strong winds, heavy snowfall, etc.
In this position, open the collar of the jacket by about 10cm, pull the hood over the helmet and simply close the collar with the gusset (rip-tab closure). The gusset creates a well-protected area for the mouth and nose.
How should you dress your kids to ensure they don't get cold on the slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. This product has 100% taped seams.
How to wash the jacket?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using products available in our stores. All the waterproof jackets that we design for snowboarders are water repellent.
What is the water repellent feature of my jacket for?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using products available in our stores. All the waterproof jackets that we design for snowboarders are water repellent.
How do I look after my product?
To optimise your jacket's performance, we advise the following: Machine wash separately at 30°C. Synthetic cycle. Turn the product inside out. Use a small amount of detergent. No softener. Wring by hand. Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator. You can restore the water resistance of the outer fabric using a fabric waterproofing spray.
Repairs
This product is repairable.
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
However, if we can't repair your product (production defect), we will exchange it or reimburse you.
