Men's warm and waterproof ski and snowboard jacket, JKT 500 black
You can wear this versatile jacket for all of your outings whatever the weather thanks to its synthetic fibre insulation, soft collar and ventilation.
Added to the fibre, the waterproof seams and membrane (10,000 mm) keep you dry. The perfect jacket for staying warm and dry while you ski!
BENEFITS
Freedom of movement
This jacket has a fitted cut without compromising on freedom of movement.
Warmth
Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.
Waterproof
15,000 mm waterproof fabric, sealed seams.
Breathability
Breathable fabric and ventilation strip on the back.
TECHNICAL INFORMATIONS
Wash and/or dry your ski/snowboard jacket: following a specific protocol, you can improve its lifespan.
Close the zips, loosen the ties and read the instructions on the label. Use a tumble dryer set to a synthetic cycle to restore the fibres. If you don't have a tumble dryer, you can find tutorials on our YouTube channel or our after-sales website.
How to restore the jacket's water-repellent properties?
The water-repellency of your jacket must be regularly reactivated (every three washes): over time, even though it remains waterproof thanks to the component, it seems to start absorbing water. To do this, use a reactivating spray or a treatment reapplication product, and follow the tutorial in the customer service section of our website.
How should you dress under your ski jacket?
When skiing, we talk about the three-layer rule: A first thermal layer (ski base layer), a second layer (fleece or down jacket) and a third layer, your jacket. Adapt the second layer to suit the conditions, or take along a bag so you can take it off during the day.
The 500 jacket is designed with a membrane component.
This is a very thin polyurethane film that makes the material waterproof while remaining breathable. More flexible, lightweight, resistant and often more breathable than coating, which is less expensive and requires a protective lining, similar to paint applied to the inside of the fabric.
Weight.
Between 0.9 kg for the S and 1.15 kg for the 2XL. 1.02 kg in size L.
Water repellent jacket, like all Quechua jackets.
A fabric's water-repellent property is its ability to let water slide off its surface without soaking in. The fabric doesn’t soak up water and so remains lightweight, breathable and warm. It is made from a treatment on the outside of the fabric, which must be renewed (every 3 washes).
Practical and comprehensive accessories for all your outings.
- 2 hand pockets
- 1 inside chest pocket
- 1 inside mesh pocket
- 1 ski pass pocket
- 1 goggle wipe
- Automatic snow skirt
- Adjustable cuffs
- Adjustable hood
Good waterproofing (10,000 mm Schmerber), tested in real-life conditions.
The waterproof component and the assembly prevent water getting in. The seams are waterproof, and the zips are also waterproof and under a protective flap. This jacket has been tested in a special shower that reproduces the conditions of the ski resorts, and in the field for several days in different weather conditions.
This product is repairable.
Beyond the warranty period (2 years), your product will still be repairable (seams, zips, etc.). During the warranty period, we will carry out repairs free of charge. These solutions are available at your nearest store.
A breathable jacket to evacuate heat during periods of exertion.
The RET, or the evaporative resistance of the material (ISO 11092 standard), is 11. The lower this rating, the more water vapour generated by the body evaporates.
RET < 9 = extremely breathable
9 < RET < 12 = very breathable
12 < RET < 20 = breathable
RET > 20 = little or no breathability.
A jacket that provides just the right amount of warmth for a day on the slopes.
In addition to the jacket's padding, the waterproof zips, snow skirt, collar, adjustable hood and adjustable cuffs provide extra insulation from the cold.
composition
composition
Padding: 100.0% Polyester; Main fabric: 100.0% Polyester; Lining: 100.0% Polyamide; Back lining: 10.0% Elastane, 90.0% Polyester; Inner fabric: 100.0% Polyester; Yoke: 100.0% Polyester; Sleeve lining: 100.0% Polyester; Collar: 100.0% Polyester; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
Storage tips
Store on a hanger and do not fold, as this can damage the fabric's water-resistance. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Quechua products are laboratory-tested, as well as tested in the real-life conditions for which they were designed: in the snow, in the cold, and in all possible conditions you may come across when skiing and snowboarding.
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessGreige
Product made from 2% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.
-
ProcessDope dyed
Product made from 41% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 35% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.